Am 04.05.2011 17:04, schrieb Igor Grinberg:
introduced by: 96974a24
(omap: consolidate touch screen initialization among different boards)
ads7846 driver can use either gpio_pendown or get_pendown_state()
callback. In case of gpio_pendown, it requests the provided gpio_pendown
thus resulting in double requesting that gpio:
ads7846 spi1.0: failed to request pendown GPIO57
ads7846: probe of spi1.0 failed with error -16
Fix this by restricting the gpio request to the case of
get_pendown_state() callback is used.
Signed-off-by: Igor Grinberg<[email protected]>
---
arch/arm/mach-omap2/common-board-devices.c | 20 ++++++++++----------
1 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm/mach-omap2/common-board-devices.c
b/arch/arm/mach-omap2/common-board-devices.c
index d57c71d..61fee80 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -83,17 +83,17 @@ void __init omap_ads7846_init(int bus_num, int
gpio_pendown, int gpio_debounce,
struct spi_board_info *spi_bi =&ads7846_spi_board_info;
int err;
- err = gpio_request(gpio_pendown, "TS PenDown");
- if (err) {
- pr_err("Could not obtain gpio for TS PenDown: %d\n", err);
- return;
- }
-
- gpio_direction_input(gpio_pendown);
- gpio_export(gpio_pendown, 0);
+ if (board_pdata&& board_pdata->get_pendown_state) {
+ err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
+ if (err) {
+ pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
+ return;
+ }
+ gpio_export(gpio_pendown, 0);
- if (gpio_debounce)
- gpio_set_debounce(gpio_pendown, gpio_debounce);
+ if (gpio_debounce)
+ gpio_set_debounce(gpio_pendown, gpio_debounce);
+ }
ads7846_config.gpio_pendown = gpio_pendown;
Tested-by: Thomas Weber <[email protected]>
On Devkit8000.
Thanks.
Thomas
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
