> -----Original Message-----
> From: [email protected] [mailto:linux-omap-
> [email protected]] On Behalf Of Valkeinen, Tomi
> Sent: Monday, May 09, 2011 1:06 PM
> To: [email protected]
> Cc: [email protected]; Valkeinen, Tomi; Stanley Miao
> Subject: [PATCH 4/6] OMAP: LDP: Port the display driver to new DSS2
>
> Port the old omapfb panel driver to DSS2i. This patch changes the board
> file only, the driver is ported in separate patch.
>
> Signed-off-by: Tomi Valkeinen <[email protected]>
> Cc: Stanley Miao <[email protected]>
> ---
> arch/arm/mach-omap2/board-ldp.c | 73 +++++++++++++++++++++++++++++++++-
> ----
> 1 files changed, 63 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-
> ldp.c
> index e2ba779..2fdfd7f 100644
> --- a/arch/arm/mach-omap2/board-ldp.c
> +++ b/arch/arm/mach-omap2/board-ldp.c
> @@ -43,6 +43,8 @@
>
> #include <asm/delay.h>
> #include <plat/usb.h>
> +#include <plat/display.h>
> +#include <plat/panel-generic-dpi.h>
>
> #include "board-flash.h"
> #include "mux.h"
> @@ -275,19 +277,71 @@ static inline void __init ldp_init_smsc911x(void)
> gpio_direction_input(eth_gpio);
> }
>
> -static struct platform_device ldp_lcd_device = {
> - .name = "ldp_lcd",
> - .id = -1,
> +/* LCD */
> +
> +#define LCD_PANEL_BACKLIGHT_GPIO (15 + OMAP_MAX_GPIO_LINES)
> +#define LCD_PANEL_ENABLE_GPIO (7 + OMAP_MAX_GPIO_LINES)
> +#define LCD_PANEL_RESET_GPIO 55
> +#define LCD_PANEL_QVGA_GPIO 56
> +
> +static int ldp_panel_enable_lcd(struct omap_dss_device *dssdev)
> +{
> + gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 1);
> + gpio_direction_output(LCD_PANEL_BACKLIGHT_GPIO, 1);
> +
> + return 0;
> +}
> +
> +static void ldp_panel_disable_lcd(struct omap_dss_device *dssdev)
> +{
> + gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 0);
> + gpio_direction_output(LCD_PANEL_BACKLIGHT_GPIO, 0);
> +}
> +
> +static struct panel_generic_dpi_data ldp_panel_data = {
> + .name = "2430sdp",
LDP is a 3430 board.
> + .platform_enable = ldp_panel_enable_lcd,
> + .platform_disable = ldp_panel_disable_lcd,
> };
>
> -static struct omap_lcd_config ldp_lcd_config __initdata = {
> - .ctrl_name = "internal",
> +static struct omap_dss_device ldp_lcd_device = {
> + .name = "lcd",
> + .driver_name = "generic_dpi_panel",
> + .type = OMAP_DISPLAY_TYPE_DPI,
> + .phy.dpi.data_lines = 16,
> + .data = &ldp_panel_data,
> };
>
> -static struct omap_board_config_kernel ldp_config[] __initdata = {
> - { OMAP_TAG_LCD, &ldp_lcd_config },
> +static struct omap_dss_device *ldp_dss_devices[] = {
> + &ldp_lcd_device,
> +};
> +
> +static struct omap_dss_board_info ldp_dss_data = {
> + .num_devices = ARRAY_SIZE(ldp_dss_devices),
> + .devices = ldp_dss_devices,
> + .default_device = &ldp_lcd_device,
> };
>
> +static void __init ldp_display_init(void)
> +{
> + int r;
> +
> + struct gpio gpios[] = {
> + {LCD_PANEL_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "LCD RESET"},
> + {LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "LCD QVGA"},
> + {LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW, "LCD ENABLE"},
> + {LCD_PANEL_BACKLIGHT_GPIO, GPIOF_OUT_INIT_LOW, "LCD
> BACKLIGHT"},
> + };
> +
> + r = gpio_request_array(gpios, ARRAY_SIZE(gpios));
> + if (r) {
> + pr_err("Cannot request LCD GPIOs, error %d\n", r);
> + return;
> + }
If I test with this patch, this request is returning error.
> +
> + omap_display_init(&ldp_dss_data);
> +}
> +
> static void __init omap_ldp_init_early(void)
> {
> omap2_init_common_infrastructure();
> @@ -390,7 +444,6 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
>
> static struct platform_device *ldp_devices[] __initdata = {
> &ldp_smsc911x_device,
> - &ldp_lcd_device,
> &ldp_gpio_keys_device,
> };
>
> @@ -441,8 +494,6 @@ static struct mtd_partition ldp_nand_partitions[] = {
> static void __init omap_ldp_init(void)
> {
> omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
> - omap_board_config = ldp_config;
> - omap_board_config_size = ARRAY_SIZE(ldp_config);
> ldp_init_smsc911x();
> omap_i2c_init();
> platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
> @@ -459,6 +510,8 @@ static void __init omap_ldp_init(void)
> omap2_hsmmc_init(mmc);
> /* link regulators to MMC adapters */
> ldp_vmmc1_supply.dev = mmc[0].dev;
> +
> + ldp_display_init();
> }
>
> MACHINE_START(OMAP_LDP, "OMAP LDP board")
> --
> 1.7.4.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
