From: Charulatha V <[email protected]> Reset GPIO (OMAP_GPIO_152) for QUART in zoom2/zoom3 debug-board is not requested at all. This would lead to problems if this GPIO is wrongly requested. Hence request OMAP GPIO 152 for QUART RESET but do not apply a reset pulse as it would reset QUART and disturb the QUART settings.
Signed-off-by: Charulatha V <[email protected]> Cc: Santosh Shilimkar <[email protected]> Cc: Kevin Hilman <[email protected]> Cc: Tony Lindgren <[email protected]> --- arch/arm/mach-omap2/board-zoom-debugboard.c | 9 +++++++++ 1 files changed, 9 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c index 007ebdc..a5f62f8 100644 --- a/arch/arm/mach-omap2/board-zoom-debugboard.c +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c @@ -22,6 +22,7 @@ #define ZOOM_SMSC911X_GPIO 158 #define ZOOM_QUADUART_CS 3 #define ZOOM_QUADUART_GPIO 102 +#define ZOOM_QUADUART_RST_GPIO 152 #define QUART_CLK 1843200 #define DEBUG_BASE 0x08000000 #define ZOOM_ETHR_START DEBUG_BASE @@ -110,6 +111,14 @@ static inline void __init zoom_init_quaduart(void) unsigned long cs_mem_base; int quart_gpio = 0; + if (gpio_request_one(ZOOM_QUADUART_RST_GPIO, + GPIOF_OUT_INIT_LOW, + "TL16CP754C GPIO") < 0) { + pr_err("Failed to request GPIO%d for TL16CP754C\n", + ZOOM_QUADUART_RST_GPIO); + return; + } + quart_cs = ZOOM_QUADUART_CS; if (gpmc_cs_request(quart_cs, SZ_1M, &cs_mem_base) < 0) { -- 1.7.1 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
