On Mon, 2011-05-16 at 14:13 +0300, Igor Grinberg wrote:
> On 05/16/11 11:53, Tomi Valkeinen wrote:
>
> > Here's an updated patch with the twl gpio code.
>
> Looks good, though one minor issue below
>
> > All the old omapfb porting patches, including new drivers for DSS2, can
> > be found from
> >
> > git://gitorious.org/linux-omap-dss2/linux.git old-omapfb-port
> >
> > Tomi
> >
> > diff --git a/arch/arm/mach-omap2/board-ldp.c
> > b/arch/arm/mach-omap2/board-ldp.c
> > index e2ba779..ed78b9a 100644
> > --- a/arch/arm/mach-omap2/board-ldp.c
> > +++ b/arch/arm/mach-omap2/board-ldp.c
> > @@ -44,6 +44,9 @@
> > #include <asm/delay.h>
> > #include <plat/usb.h>
> >
> > +#include <video/omapdss.h>
> > +#include <video/omap-panel-generic-dpi.h>
> > +
> > #include "board-flash.h"
> > #include "mux.h"
> > #include "hsmmc.h"
> > @@ -275,19 +278,70 @@ static inline void __init ldp_init_smsc911x(void)
> > gpio_direction_input(eth_gpio);
> > }
> >
> > -static struct platform_device ldp_lcd_device = {
> > - .name = "ldp_lcd",
> > - .id = -1,
> > +/* LCD */
> > +
> > +static int ldp_backlight_gpio;
> > +static int ldp_lcd_enable_gpio;
> > +
> > +#define LCD_PANEL_RESET_GPIO 55
> > +#define LCD_PANEL_QVGA_GPIO 56
> > +
> > +static int ldp_panel_enable_lcd(struct omap_dss_device *dssdev)
> > +{
> > + gpio_direction_output(ldp_lcd_enable_gpio, 1);
> > + gpio_direction_output(ldp_backlight_gpio, 1);
> > +
> > + return 0;
> > +}
> > +
> > +static void ldp_panel_disable_lcd(struct omap_dss_device *dssdev)
> > +{
> > + gpio_direction_output(ldp_lcd_enable_gpio, 0);
> > + gpio_direction_output(ldp_backlight_gpio, 0);
> > +}
> > +
> > +static struct panel_generic_dpi_data ldp_panel_data = {
> > + .name = "2430sdp",
> > + .platform_enable = ldp_panel_enable_lcd,
> > + .platform_disable = ldp_panel_disable_lcd,
> > +};
> > +
> > +static struct omap_dss_device ldp_lcd_device = {
> > + .name = "lcd",
> > + .driver_name = "generic_dpi_panel",
> > + .type = OMAP_DISPLAY_TYPE_DPI,
> > + .phy.dpi.data_lines = 16,
> > + .data = &ldp_panel_data,
> > };
> >
> > -static struct omap_lcd_config ldp_lcd_config __initdata = {
> > - .ctrl_name = "internal",
> > +static struct omap_dss_device *ldp_dss_devices[] = {
> > + &ldp_lcd_device,
> > };
> >
> > -static struct omap_board_config_kernel ldp_config[] __initdata = {
> > - { OMAP_TAG_LCD, &ldp_lcd_config },
> > +static struct omap_dss_board_info ldp_dss_data = {
> > + .num_devices = ARRAY_SIZE(ldp_dss_devices),
> > + .devices = ldp_dss_devices,
> > + .default_device = &ldp_lcd_device,
> > };
> >
> > +static void __init ldp_display_init(void)
> > +{
> > + int r;
> > +
> > + static struct gpio gpios[] __initdata = {
> > + {LCD_PANEL_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "LCD RESET"},
> > + {LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "LCD QVGA"},
> > + };
> > +
> > + r = gpio_request_array(gpios, ARRAY_SIZE(gpios));
> > + if (r) {
> > + pr_err("Cannot request LCD GPIOs, error %d\n", r);
> > + return;
> > + }
> > +
> > + omap_display_init(&ldp_dss_data);
> > +}
> > +
> > static void __init omap_ldp_init_early(void)
> > {
> > omap2_init_common_infrastructure();
> > @@ -298,10 +352,30 @@ static struct twl4030_usb_data ldp_usb_data = {
> > .usb_mode = T2_USB_MODE_ULPI,
> > };
> >
> > +static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned
> > ngpio)
> > +{
> > + int r;
> > +
> > + struct gpio gpios[] = {
> > + {gpio + 7 , GPIOF_OUT_INIT_LOW, "LCD ENABLE"},
> > + {gpio + 15, GPIOF_OUT_INIT_LOW, "LCD BACKLIGHT"},
> > + };
> > +
> > + r = gpio_request_array(gpios, ARRAY_SIZE(gpios));
> > + if (r)
> > + pr_err("Cannot request LCD GPIOs, error %d\n", r);
> > +
> > + ldp_backlight_gpio = gpio + 15;
> > + ldp_lcd_enable_gpio = gpio + 7;
>
> If the gpio_request_array() fails (though it shouldn't),
> won't it be right to set both variables to -EINVAL?
Ah, yes. I'll fix that.
Do you know what will happen if twl_gpio_setup fails? Just an error
print, or will TWL driver fail?
> Thanks for bringing this all together.
We still don't know if it works or not =).
Tomi
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
