Hi,
On Sunday, June 05, 2011, Janusz Krzysztofik wrote:
> In its current form, pm_runtime_clk_notify() iterates through sub-
> strings of pm_clk_notifier_block.con_ids[0] rather than consecutive
> pm_clk_notifier_block.con_ids[] elements. As a noticeable result, McBSP1
> port no longer worked for me on updated arch/arm/mach-omap1/pm_bus.c
> (commit 600b776eb39a13a28b090ba9efceb0c69d4508aa, "OMAP1 / PM: Use
> generic clock manipulation routines for runtime PM"), not being able to
> activate "fck" when required.
>
> Tested on Amstrad Delta.
>
> Signed-off-by: Janusz Krzysztofik <[email protected]>
> ---
> drivers/base/power/clock_ops.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> --- git/drivers/base/power/clock_ops.c.orig 2011-05-30 22:16:35.000000000
> +0200
> +++ git/drivers/base/power/clock_ops.c 2011-06-05 15:19:55.000000000
> +0200
> @@ -291,7 +291,7 @@ static int pm_runtime_clk_notify(struct
> {
> struct pm_clk_notifier_block *clknb;
> struct device *dev = data;
> - char *con_id;
> + char **con_id;
> int error;
>
> dev_dbg(dev, "%s() %ld\n", __func__, action);
> @@ -309,8 +309,8 @@ static int pm_runtime_clk_notify(struct
>
> dev->pwr_domain = clknb->pwr_domain;
> if (clknb->con_ids[0]) {
> - for (con_id = clknb->con_ids[0]; *con_id; con_id++)
> - pm_runtime_clk_add(dev, con_id);
> + for (con_id = &clknb->con_ids[0]; *con_id; con_id++)
> + pm_runtime_clk_add(dev, *con_id);
> } else {
> pm_runtime_clk_add(dev, NULL);
> }
First off, sorry for the breakage. Second, while the patch is correct in
the part is covered, it is incomplete (it also should cover the
!CONFIG_PM_RUNTIME case. So, I think the appended patch would be better.
Thanks,
Rafael
---
drivers/base/power/clock_ops.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
Index: linux-2.6/drivers/base/power/clock_ops.c
===================================================================
--- linux-2.6.orig/drivers/base/power/clock_ops.c
+++ linux-2.6/drivers/base/power/clock_ops.c
@@ -291,7 +291,7 @@ static int pm_runtime_clk_notify(struct
{
struct pm_clk_notifier_block *clknb;
struct device *dev = data;
- char *con_id;
+ char **con_id;
int error;
dev_dbg(dev, "%s() %ld\n", __func__, action);
@@ -309,8 +309,8 @@ static int pm_runtime_clk_notify(struct
dev->pwr_domain = clknb->pwr_domain;
if (clknb->con_ids[0]) {
- for (con_id = clknb->con_ids[0]; *con_id; con_id++)
- pm_runtime_clk_add(dev, con_id);
+ for (con_id = clknb->con_ids; *con_id; con_id++)
+ pm_runtime_clk_add(dev, *con_id);
} else {
pm_runtime_clk_add(dev, NULL);
}
@@ -380,7 +380,7 @@ static int pm_runtime_clk_notify(struct
{
struct pm_clk_notifier_block *clknb;
struct device *dev = data;
- char *con_id;
+ char **con_id;
dev_dbg(dev, "%s() %ld\n", __func__, action);
@@ -389,16 +389,16 @@ static int pm_runtime_clk_notify(struct
switch (action) {
case BUS_NOTIFY_ADD_DEVICE:
if (clknb->con_ids[0]) {
- for (con_id = clknb->con_ids[0]; *con_id; con_id++)
- enable_clock(dev, con_id);
+ for (con_id = clknb->con_ids; *con_id; con_id++)
+ enable_clock(dev, *con_id);
} else {
enable_clock(dev, NULL);
}
break;
case BUS_NOTIFY_DEL_DEVICE:
if (clknb->con_ids[0]) {
- for (con_id = clknb->con_ids[0]; *con_id; con_id++)
- disable_clock(dev, con_id);
+ for (con_id = clknb->con_ids; *con_id; con_id++)
+ disable_clock(dev, *con_id);
} else {
disable_clock(dev, NULL);
}
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
