Hi, On Fri, Jun 24, 2011 at 10:37:56PM +0530, Jaswinder Singh wrote: > [CC'ing Liam and Mark as well] > > On 24 June 2011 20:07, Jassi Brar <[email protected]> wrote: > > VUSB is a fixed level line and hence have no set_voltage > > callback in regulator ops, but has apply_uV set to true. > > As a result it fails to register with the regulator core. > > Remove setting apply_uV. > > > > Also, assign name to VUSB supply, without which regulator core > > fails to find it and assigns the default 'dummy' regulator to > > the ehci-omap device. > > > > Signed-off-by: Jassi Brar <[email protected]> > > --- > > arch/arm/mach-omap2/board-4430sdp.c | 6 +++++- > > arch/arm/mach-omap2/board-omap4panda.c | 6 +++++- > > 2 files changed, 10 insertions(+), 2 deletions(-) > > > > diff --git a/arch/arm/mach-omap2/board-4430sdp.c > > b/arch/arm/mach-omap2/board-4430sdp.c > > index 63de2d3..1ec60be 100644 > > --- a/arch/arm/mach-omap2/board-4430sdp.c > > +++ b/arch/arm/mach-omap2/board-4430sdp.c > > @@ -504,16 +504,20 @@ static struct regulator_init_data sdp4430_vdac = { > > }, > > }; > > > > +static struct regulator_consumer_supply sdp4430_vusb_supply = > > + REGULATOR_SUPPLY("hsusb0", "ehci-omap.0");
this should be an array.
> > static struct regulator_init_data sdp4430_vusb = {
> > .constraints = {
> > .min_uV = 3300000,
> > .max_uV = 3300000,
> > - .apply_uV = true,
> > .valid_modes_mask = REGULATOR_MODE_NORMAL
> > | REGULATOR_MODE_STANDBY,
> > .valid_ops_mask = REGULATOR_CHANGE_MODE
> > | REGULATOR_CHANGE_STATUS,
> > },
> > + .num_consumer_supplies = 1,
ARRAY_SIZE()
> > + .consumer_supplies = &sdp4430_vusb_supply,
drop the &.
ditto to other.
--
balbi
signature.asc
Description: Digital signature
