On Sat, Jul 16, 2011 at 4:22 AM, Sergei Shtylyov <[email protected]> wrote:
>
> Hello.
>
> On 16-07-2011 3:44, Vikram Pandita wrote:
>
>> From: Vikram Pandita <[email protected]>
>
>> This patch enables the DMA mode1 RX support.
>> This feature is enabled based on the short_not_ok flag passed from
>> gadget drivers.
>
>> This will result in a thruput performance gain of around
>> 40% for USB mass-storage/mtp use cases.
>
>> Based on Original work by
>> Anand Gadiyar<[email protected]> on 2.6.35 kernel
>
>> Tested on OMAP4460 Blaze board.
>
>> Signed-off-by: Moiz Sonasath <[email protected]>
>> Signed-off-by: Vikram Pandita <[email protected]>
>> ---
>> drivers/usb/musb/musb_gadget.c | 42
>> ++++++++++++++++++++++++++++-----------
>> 1 files changed, 30 insertions(+), 12 deletions(-)
>
>> diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
>> index 9412410..e643ec2 100644
>> --- a/drivers/usb/musb/musb_gadget.c
>> +++ b/drivers/usb/musb/musb_gadget.c
>> @@ -624,6 +624,7 @@ void musb_g_tx(struct musb *musb, u8 epnum)
>> /*
>> * Context: controller locked, IRQs blocked, endpoint selected
>> */
>> +
>
> Why?
typo - will fix in v2
>
>> static void rxstate(struct musb *musb, struct musb_request *req)
>> {
>> const u8 epnum = req->epnum;
>> @@ -714,10 +728,13 @@ static void rxstate(struct musb *musb, struct
>> musb_request *req)
>> * then becomes usable as a runtime "use mode 1" hint...
>> */
>>
>> - csr |= MUSB_RXCSR_DMAENAB;
>> -#ifdef USE_MODE1
>> + /* Experimental: Mode1 works with mass storage use cases
>> + */
>> + if (use_mode_1) {
>
> No, you can't put the code at the arbitrary indentation levels. Please
> indent properly.
agree. v2 will address.
>
>> csr |= MUSB_RXCSR_AUTOCLEAR;
>> - /* csr |= MUSB_RXCSR_DMAMODE; */
>> + musb_writew(epio, MUSB_RXCSR, csr);
>> + csr |= MUSB_RXCSR_DMAENAB;
>> + musb_writew(epio, MUSB_RXCSR, csr);
>>
>> /* this special sequence (enabling and then
>> * disabling MUSB_RXCSR_DMAMODE) is required
>> @@ -725,26 +742,27 @@ static void rxstate(struct musb *musb, struct
>> musb_request *req)
>> */
>> musb_writew(epio, MUSB_RXCSR,
>> csr | MUSB_RXCSR_DMAMODE);
>> -#else
>> + musb_writew(epio, MUSB_RXCSR, csr);
>> +
>> + } else {
>> if (!musb_ep->hb_mult &&
>> musb_ep->hw_ep->rx_double_buffered)
>> csr |= MUSB_RXCSR_AUTOCLEAR;
>> -#endif
>> + csr |= MUSB_RXCSR_DMAENAB;
>> musb_writew(epio, MUSB_RXCSR, csr);
>> + }
>>
>> if (request->actual< request->length) {
>> int transfer_size = 0;
>> -#ifdef USE_MODE1
>> + if (use_mode_1) {
>
> Same here.
agree. v2 will address.
>
>> transfer_size = min(request->length -
>> request->actual,
>> channel->max_len);
>> -#else
>> + musb_ep->dma->desired_mode = 1;
>> + } else {
>> transfer_size = min(request->length -
>> request->actual,
>> (unsigned)len);
>> -#endif
>> - if (transfer_size <=
>> musb_ep->packet_sz)
>> - musb_ep->dma->desired_mode =
>> 0;
>> - else
>> - musb_ep->dma->desired_mode =
>> 1;
>> + musb_ep->dma->desired_mode = 0;
>> + }
>>
>> use_dma = c->channel_program(
>> channel,
>
> WBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
