On Thursday 04 August 2011 04:34 PM, Tarun Kanti DebBarma wrote:
Getting rid of ifdefs within the function by adding register offset intctrl
and associating OMAPXXXX_GPIO_INT_CONTROL in respective SoC specific files.
Also, use wkup_status register consistently instead of referring to wakeup
clear and wakeup set register offsets.
Signed-off-by: Charulatha V<[email protected]>
Signed-off-by: Tarun Kanti DebBarma<[email protected]>
---
Good. Some comments.
arch/arm/mach-omap1/gpio15xx.c | 2 +
arch/arm/mach-omap1/gpio16xx.c | 3 +
arch/arm/mach-omap1/gpio7xx.c | 2 +
arch/arm/plat-omap/include/plat/gpio.h | 3 +
drivers/gpio/gpio-omap.c | 159 ++++++++-----------------------
5 files changed, 51 insertions(+), 118 deletions(-)
diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c
index f8c15ea..2adfece 100644
--- a/arch/arm/mach-omap1/gpio15xx.c
+++ b/arch/arm/mach-omap1/gpio15xx.c
@@ -42,6 +42,7 @@ static struct omap_gpio_reg_offs omap15xx_mpuio_regs = {
.irqstatus = OMAP_MPUIO_GPIO_INT,
.irqenable = OMAP_MPUIO_GPIO_MASKIT,
.irqenable_inv = true,
+ .irqctrl = OMAP_MPUIO_GPIO_INT_EDGE,
};
static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = {
@@ -83,6 +84,7 @@ static struct omap_gpio_reg_offs omap15xx_gpio_regs = {
.irqstatus = OMAP1510_GPIO_INT_STATUS,
.irqenable = OMAP1510_GPIO_INT_MASK,
.irqenable_inv = true,
+ .irqctrl = OMAP1510_GPIO_INT_CONTROL,
};
static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = {
diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c
index ed9f285..f619805 100644
--- a/arch/arm/mach-omap1/gpio16xx.c
+++ b/arch/arm/mach-omap1/gpio16xx.c
@@ -45,6 +45,7 @@ static struct omap_gpio_reg_offs omap16xx_mpuio_regs = {
.irqstatus = OMAP_MPUIO_GPIO_INT,
.irqenable = OMAP_MPUIO_GPIO_MASKIT,
.irqenable_inv = true,
+ .irqctrl = OMAP_MPUIO_GPIO_INT_EDGE,
};
static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = {
@@ -90,6 +91,8 @@ static struct omap_gpio_reg_offs omap16xx_gpio_regs = {
.set_irqenable = OMAP1610_GPIO_SET_IRQENABLE1,
.clr_irqenable = OMAP1610_GPIO_CLEAR_IRQENABLE1,
.wkup_status = OMAP1610_GPIO_WAKEUPENABLE,
+ .edgectrl1 = OMAP1610_GPIO_EDGE_CTRL1,
+ .edgectrl2 = OMAP1610_GPIO_EDGE_CTRL2,
};
static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = {
diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c
index 923eaa1..cb083c5 100644
--- a/arch/arm/mach-omap1/gpio7xx.c
+++ b/arch/arm/mach-omap1/gpio7xx.c
@@ -47,6 +47,7 @@ static struct omap_gpio_reg_offs omap7xx_mpuio_regs = {
.irqstatus = OMAP_MPUIO_GPIO_INT / 2,
.irqenable = OMAP_MPUIO_GPIO_MASKIT / 2,
.irqenable_inv = true,
+ .irqctrl = OMAP_MPUIO_GPIO_INT_EDGE / 2,
Shift operator would have been better here.
[...]
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index e7c9fe5..21cb0d4 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
[..]
+ trigger != 0);
+
+ /* This part needs to be executed always for OMAP34xx */
+ if (cpu_is_omap34xx() || (bank->non_wakeup_gpios& gpio_bit)) {
Why ? You might want handle this special case with some flag instead.
/*
* Log the edge gpio and manually trigger the IRQ
* after resume if the input level changes
@@ -261,7 +236,6 @@ static inline void set_24xx_gpio_triggering(struct
gpio_bank *bank, int gpio,
__raw_readl(bank->base + bank->regs->leveldetect0) |
__raw_readl(bank->base + bank->regs->leveldetect1);
}
-#endif
#ifdef CONFIG_ARCH_OMAP1
/*
[...]
-#endif
- default:
- goto bad;
+
+ _gpio_rmw(base, bank->regs->wkup_status, 1<< gpio, trigger);
+
Avoid this extra line.
Rest of the changes looks good to me.
Regards
Santosh
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
