OMAP DSS normally gets power from VCXIO on OMAP4. Add configuration for this into twl-common.c
Mark VCXIO as always_on, as VCXIO is used by multiple components, including the MPU, and turning it off when DSS doesn't need it would lead the device to halt. Signed-off-by: Tomi Valkeinen <[email protected]> --- arch/arm/mach-omap2/twl-common.c | 9 +++++++++ 1 files changed, 9 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 4f6d216..52243577 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -235,6 +235,12 @@ static struct regulator_init_data omap4_vana_idata = { }, }; +static struct regulator_consumer_supply omap4_vcxio_supply[] = { + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dss"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.1"), +}; + static struct regulator_init_data omap4_vcxio_idata = { .constraints = { .min_uV = 1800000, @@ -243,7 +249,10 @@ static struct regulator_init_data omap4_vcxio_idata = { | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, + .always_on = true, }, + .num_consumer_supplies = ARRAY_SIZE(omap4_vcxio_supply), + .consumer_supplies = omap4_vcxio_supply, }; static struct regulator_init_data omap4_vusb_idata = { -- 1.7.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
