From: Afzal Mohammed <[email protected]> Add support for low level debugging on AM335X EVM (AM33XX family). Currently only support for UART1 console, which is used on AM335X EVM is added.
Signed-off-by: Afzal Mohammed <[email protected]> Signed-off-by: Vaibhav Hiremath <[email protected]> --- arch/arm/mach-omap2/include/mach/debug-macro.S | 22 ++++++++++++++++++++++ arch/arm/plat-omap/include/plat/serial.h | 4 ++++ arch/arm/plat-omap/include/plat/uncompress.h | 6 ++++++ 3 files changed, 32 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S index 48adfe9..f649973 100644 --- a/arch/arm/mach-omap2/include/mach/debug-macro.S +++ b/arch/arm/mach-omap2/include/mach/debug-macro.S @@ -78,6 +78,8 @@ omap_uart_lsr: .word 0 beq 82f @ configure UART2 cmp \rp, #TI816XUART3 @ ti816x UART offsets different beq 83f @ configure UART3 + cmp \rp, #AM33XXUART1 @ AM33XX UART offsets different + beq 84f @ configure UART1 cmp \rp, #ZOOM_UART @ only on zoom2/3 beq 95f @ configure ZOOM_UART @@ -106,6 +108,9 @@ omap_uart_lsr: .word 0 b 98f 83: mov \rp, #UART_OFFSET(TI816X_UART3_BASE) b 98f +84: ldr \rp, =AM33XX_UART1_BASE + and \rp, \rp, #0x00ffffff + b 97f 95: ldr \rp, =ZOOM_UART_BASE mrc p15, 0, \rv, c1, c0 tst \rv, #1 @ MMU enabled? @@ -121,6 +126,23 @@ omap_uart_lsr: .word 0 b 10b /* Store both phys and virt address for the uart */ +97: add \rp, \rp, #0x44000000 @ phys base + mrc p15, 0, \rv, c1, c0 + tst \rv, #1 @ MMU enabled? + ldreq \rv, =omap_uart_v2p(omap_uart_phys) @ MMU disabled + ldrne \rv, =omap_uart_phys @ MMU enabled + str \rp, [\rv, #0] + sub \rp, \rp, #0x44000000 @ phys base + add \rp, \rp, #0xf9000000 @ virt base + add \rv, \rv, #4 @ omap_uart_virt + str \rp, [\rv, #0] + mov \rp, #(UART_LSR << OMAP_PORT_SHIFT) + add \rv, \rv, #4 @ omap_uart_lsr + str \rp, [\rv, #0] + + b 10b + + /* Store both phys and virt address for the uart */ 98: add \rp, \rp, #0x48000000 @ phys base mrc p15, 0, \rv, c1, c0 tst \rv, #1 @ MMU enabled? diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h index de3b10c..ad19377 100644 --- a/arch/arm/plat-omap/include/plat/serial.h +++ b/arch/arm/plat-omap/include/plat/serial.h @@ -59,6 +59,9 @@ /* AM3505/3517 UART4 */ #define AM35XX_UART4_BASE 0x4809E000 /* Only on AM3505/3517 */ +/* AM33XX serial port */ +#define AM33XX_UART1_BASE 0x44E09000 + /* External port on Zoom2/3 */ #define ZOOM_UART_BASE 0x10000000 #define ZOOM_UART_VIRT 0xfa400000 @@ -92,6 +95,7 @@ #define TI816XUART1 81 #define TI816XUART2 82 #define TI816XUART3 83 +#define AM33XXUART1 84 #define ZOOM_UART 95 /* Only on zoom2/3 */ /* This is only used by 8250.c for omap1510 */ diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index a067484..bd1e051 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -97,6 +97,10 @@ static inline void flush(void) _DEBUG_LL_ENTRY(mach, TI816X_UART##p##_BASE, OMAP_PORT_SHIFT, \ TI816XUART##p) +#define DEBUG_LL_AM33XX(p, mach) \ + _DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT, \ + AM33XXUART##p) + static inline void __arch_decomp_setup(unsigned long arch_id) { int port = 0; @@ -173,6 +177,8 @@ static inline void __arch_decomp_setup(unsigned long arch_id) /* TI8168 base boards using UART3 */ DEBUG_LL_TI816X(3, ti8168evm); + /* AM33XX base boards using UART1 */ + DEBUG_LL_AM33XX(1, am335xevm); } while (0); } -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
