On Tue, 2011-09-20 at 21:06 +0530, K, Mythri P wrote: > Hi, > > On Tue, Sep 20, 2011 at 7:01 PM, Tomi Valkeinen <[email protected]> wrote: > > On Tue, 2011-09-20 at 18:19 +0530, [email protected] wrote: > >> From: Mythri P K <[email protected]> > >> > >> Add support to dump the HDMI regm, regn, and other clock parameters. > > > > This patch doesn't work at all. It's checking for CONFIG_OMAP2_DSS_HDMI, > > whereas the actual define is CONFIG_OMAP4_DSS_HDMI. And even after > > fixing that, the output is: > > > > HDMI Clock Info > > regm 104regmf 104 > > dcofreq 0regsd 1 > > DSS_FCK (DSS_FCLK) (off) > > hdmi fclk source = 3 > > > These are the reg m , mf , dcofreq , by default the HDMI clock input is > sysclk , > These values are based on the pixel clock.I suppose all the other > clock values are > printed via dss / dispc clock dump , is there any other dump that is missing?
I don't know, as the output was so garbled that I didn't look any further. But just look at the outputs from other interfaces, mainly DSI. Make the output format similar, and print relevant information in the same way. Tomi -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
