Add initial OMAP3 soc file with empty ocp bus. Based on initial patch from Manju: http://www.spinics.net/lists/linux-omap/msg55830.html
Signed-off-by: Benoit Cousson <[email protected]> Cc: Grant Likely <[email protected]> Cc: G, Manjunath Kondaiah <[email protected]> --- arch/arm/boot/dts/omap3.dtsi | 44 ++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 44 insertions(+), 0 deletions(-) create mode 100644 arch/arm/boot/dts/omap3.dtsi diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi new file mode 100644 index 0000000..d558785 --- /dev/null +++ b/arch/arm/boot/dts/omap3.dtsi @@ -0,0 +1,44 @@ +/* + * Device Tree Source for OMAP3 SoC + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "ti,omap3430", "ti,omap3"; + + /* + * The soc node represents the soc top level view. It is uses for IPs + * that are not memory mapped in the MPU view or for the MPU itself. + */ + soc { + compatible = "ti,omap-infra"; + }; + + /* + * XXX: Use a flat representation of the OMAP3 interconnect. + * The real OMAP interconnect network is quite complex. + * Since that will not bring real advantage to represent that in DT for + * the moment, just use a fake OCP bus entry to represent the whole bus + * hierarchy. + */ + ocp { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "l3_main"; + + intc: interrupt-controller@1 { + compatible = "ti,omap3-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; +}; -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
