These three boards unconditionally use the twl4030 driver
from the board-zoom-display.c file. Make sure that the driver
is always there.
We also need to select the I2C core so we are able to build
that driver.
Signed-off-by: Arnd Bergmann <a...@arndb.de>
---
arch/arm/mach-omap2/Kconfig | 6 ++++++
1 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 57b66d5..4deeade 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -253,6 +253,8 @@ config MACH_OMAP_ZOOM2
select SERIAL_CORE_CONSOLE
select SERIAL_8250_CONSOLE
select REGULATOR_FIXED_VOLTAGE
+ select TWL4030_CORE
+ select I2C
config MACH_OMAP_ZOOM3
bool "OMAP3630 Zoom3 board"
@@ -263,6 +265,8 @@ config MACH_OMAP_ZOOM3
select SERIAL_CORE_CONSOLE
select SERIAL_8250_CONSOLE
select REGULATOR_FIXED_VOLTAGE
+ select TWL4030_CORE
+ select I2C
config MACH_CM_T35
bool "CompuLab CM-T35/CM-T3730 modules"
@@ -304,6 +308,8 @@ config MACH_OMAP_3630SDP
depends on ARCH_OMAP3
default y
select OMAP_PACKAGE_CBP
+ select TWL4030_CORE
+ select I2C
config MACH_TI8168EVM
bool "TI8168 Evaluation Module"
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
