"Govindraj.R" <[email protected]> writes: > We had been using traditional 8250 driver as uart console driver > prior to omap-serial driver. Since we have omap-serial driver > in mainline kernel for some time now it has been used as default > uart console driver on omap2+ platforms. Remove 8250 support for > omap-uarts.
Nice to see the this disappearing. > Serial_in and serial_out override for 8250 serial driver is also > removed. Empty fifo read fix is already taken care with omap-serial > driver with data ready bit check from LSR reg before reading RX fifo. As stated in the previous review. Patches that move code/features should have the removal and the add-back in the same patch. Doing so makes it easy for reviewers to see whether it was simply moved, or if it was modified when it was moved, etc. > Also waiting for THRE(transmit hold reg empty) is done with wait_for_xmitr > in omap-serial driver. Again, remove it here in the patch that adds that support (the errata patch I guess.) > Remove headers that were necessary to support 8250 support > and remove all config bindings done to keep 8250 backward compatibility > while adding omap-serial driver. Remove omap_uart_reset needed for > 8250 autoconf. > > Signed-off-by: Govindraj.R <[email protected]> So basically, this patch should only remove the legacy 8250 support (as the subject says) and everything else should be done in the other relevant patches. Kevin -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
