[PATCH 4/4] arm: omap3: cm-t35: add reset for sb-t35 usb hub

[Igor Grinberg]

Signed-off-by: Igor Grinberg <grinb...@compulab.co.il>
---
 arch/arm/mach-omap2/board-cm-t35.c |   22 ++++++++++++++++++++--
 1 files changed, 20 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-omap2/board-cm-t35.c 
b/arch/arm/mach-omap2/board-cm-t35.c
index 18cd50c..3201c9e 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -52,7 +52,8 @@
 #include "hsmmc.h"
 #include "common-board-devices.h"
 
-#define CM_T35_GPIO_PENDOWN    57
+#define CM_T35_GPIO_PENDOWN            57
+#define SB_T35_USB_HUB_RESET_GPIO      167
 
 #define CM_T35_SMSC911X_CS     5
 #define CM_T35_SMSC911X_GPIO   163
@@ -436,6 +437,23 @@ static struct usbhs_omap_board_data usbhs_bdata __initdata 
= {
        .reset_gpio_port[2]  = -EINVAL
 };
 
+static void cm_t35_init_usbh(void)
+{
+       int err;
+
+       err = gpio_request_one(SB_T35_USB_HUB_RESET_GPIO,
+                              GPIOF_OUT_INIT_LOW, "usb hub rst");
+       if (err) {
+               pr_err("SB-T35: usb hub rst gpio request failed: %d\n", err);
+       } else {
+               udelay(10);
+               gpio_set_value(SB_T35_USB_HUB_RESET_GPIO, 1);
+               msleep(1);
+       }
+
+       usbhs_init(&usbhs_bdata);
+}
+
 static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio,
                                 unsigned ngpio)
 {
@@ -624,7 +642,7 @@ static void __init cm_t3x_common_init(void)
        cm_t35_init_display();
 
        usb_musb_init(NULL);
-       usbhs_init(&usbhs_bdata);
+       cm_t35_init_usbh();
 }
 
 static void __init cm_t35_init(void)
-- 
1.7.3.4

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html