* [email protected] <[email protected]> [111111 04:41]: > From: Mythri P K <[email protected]> > > Disables the internal pull resistor for SDA and SCL enabled by > default as there are expernal pull up's in 4460 and 4430 ES2.3, > It is done to avoid the EDID read failure. > > Signed-off-by: Ricardo Salveti de Araujo <[email protected]> > Signed-off-by: Mythri P K <[email protected]> > --- > arch/arm/mach-omap2/board-4430sdp.c | 12 +++++++++++- > arch/arm/mach-omap2/board-omap4panda.c | 13 ++++++++++++- > arch/arm/mach-omap2/display.c | 17 ++++++++++++++--- > include/video/omapdss.h | 2 +- > 4 files changed, 38 insertions(+), 6 deletions(-) > > diff --git a/arch/arm/mach-omap2/board-4430sdp.c > b/arch/arm/mach-omap2/board-4430sdp.c > index 4a519a3..91d3742 100644 > --- a/arch/arm/mach-omap2/board-4430sdp.c > +++ b/arch/arm/mach-omap2/board-4430sdp.c > @@ -826,7 +826,17 @@ static void omap_4430sdp_display_init(void) > sdp4430_lcd_init(); > sdp4430_picodlp_init(); > omap_display_init(&sdp4430_dss_data); > - omap_hdmi_enable_pads(); > + /* > + * CONTROL_I2C_1: HDMI_DDC_SDA_PULLUPRESX (bit 28) and > + * HDMI_DDC_SCL_PULLUPRESX (bit 24) are set to disable > + * internal pull up resistor - This is a change needed in > + * OMAP4460 and OMAP4430 ES2.3 as the external pull up > + * are present. This is needed to avoid EDID read failure. > + */ > + if (cpu_is_omap446x() || (omap_rev() > OMAP4430_REV_ES2_2)) > + omap_hdmi_enable_pads(1); > + else > + omap_hdmi_enable_pads(0); > }
If you now have omap_hdmi_init(), then you can just pass it board specific flags like OMAP_HDMI_EXTERNAL_PULL. The generic init function will make it easier to move things over to DT also. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
