[email protected] writes:
> From: Jean Pihet <[email protected]>
>
> When a PM QoS device latency constraint is requested or removed the
> PM QoS layer notifies the underlying layer with the updated aggregated
> constraint value. The constraint is stored in the powerdomain constraints
> list and then applied to the corresponding power domain.
> The power domains get the next power state programmed directly in the
> registers via pwrdm_wakeuplat_update_pwrst.
>
> Tested on OMAP3 Beagleboard and OMAP4 Pandaboard in RET/OFF using
> wake-up latency constraints on MPU, CORE and PER.
>
> Signed-off-by: Jean Pihet <[email protected]>
> ---
> arch/arm/mach-omap2/powerdomain.c | 237
> +++++++++++++++++++++++++++++++++++++
> arch/arm/mach-omap2/powerdomain.h | 35 +++++-
> 2 files changed, 270 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/powerdomain.c
> b/arch/arm/mach-omap2/powerdomain.c
> index 9af0847..351766d 100644
> --- a/arch/arm/mach-omap2/powerdomain.c
> +++ b/arch/arm/mach-omap2/powerdomain.c
> @@ -17,8 +17,10 @@
> #include <linux/kernel.h>
> #include <linux/types.h>
> #include <linux/list.h>
> +#include <linux/slab.h>
> #include <linux/errno.h>
> #include <linux/string.h>
> +#include <linux/pm_qos.h>
> #include <trace/events/power.h>
>
> #include "cm2xxx_3xxx.h"
> @@ -104,6 +106,12 @@ static int _pwrdm_register(struct powerdomain *pwrdm)
> for (i = 0; i < pwrdm->banks; i++)
> pwrdm->ret_mem_off_counter[i] = 0;
>
> + /* Initialize the per-od wake-up constraints data */
This comment needs an update (they are not per-od, but per pwrdm), or
could probably be removed, since it doesn't add any value over the code.
> + spin_lock_init(&pwrdm->wkup_lat_plist_lock);
> + plist_head_init(&pwrdm->wkup_lat_plist_head);
> + pwrdm->wkup_lat_next_state = PWRDM_POWER_OFF;
> +
> + /* Initialize the pwrdm state */
> pwrdm_wait_transition(pwrdm);
> pwrdm->state = pwrdm_read_pwrst(pwrdm);
> pwrdm->state_counter[pwrdm->state] = 1;
> @@ -191,6 +199,158 @@ static int _pwrdm_post_transition_cb(struct powerdomain
> *pwrdm, void *unused)
> return 0;
> }
>
> +/**
> + * _pwrdm_wakeuplat_update_list - Set/update/remove a powerdomain wakeup
> + * latency constraint from the pwrdm's constraint list
> + * @pwrdm: struct powerdomain * which the constraint applies to
> + * @cookie: constraint identifier, used for tracking.
> + * @min_latency: minimum wakeup latency constraint (in microseconds) for
> + * the given pwrdm. The value of PM_QOS_DEV_LAT_DEFAULT_VALUE removes
> + * the constraint.
> + * @user: pointer to the current list entry
> + * @new_user: allocated list entry, used for insertion of new constraints
> + * in the list
> + * @free_new_user: set to non-zero if the newly allocated list entry
> + * is unused and needs to be freed
> + * @free_node: set to non-zero if the current list entry is not in use
> + * anymore and needs to be freed
> + *
> + * Tracks the constraints by @cookie.
> + * Constraint set/update: Adds a new entry to powerdomain's wake-up latency
> + * constraint list.
> + * If the constraint identifier already exists in the list, the old value is
> + * overwritten.
> + * Constraint removal: Removes the identifier's entry from powerdomain's
> + * wakeup latency constraint list.
> + *
> + * Called with the pwrdm wakeup latency spinlock held.
> + *
> + * Returns 0 upon success, -EINVAL if the constraint is not existing.
> + */
> +static inline int _pwrdm_update_wakeuplat_list(
> + struct powerdomain *pwrdm,
> + void *cookie,
> + long min_latency,
> + struct pwrdm_wkup_constraints_entry *user,
> + struct pwrdm_wkup_constraints_entry *new_user,
> + int *free_new_user,
> + int *free_node)
> +{
> + struct pwrdm_wkup_constraints_entry *tmp_user;
> +
> + /* Check if there already is a constraint for cookie */
> + plist_for_each_entry(tmp_user, &pwrdm->wkup_lat_plist_head, node) {
> + if (tmp_user->cookie == cookie) {
> + user = tmp_user;
> + break;
> + }
> + }
> +
> + if (min_latency != PM_QOS_DEV_LAT_DEFAULT_VALUE) {
> + /* If nothing to update, job done */
> + if (user && (user->node.prio == min_latency))
> + return 0;
> +
> + if (!user) {
> + /* Add new entry to the list */
> + user = new_user;
> + user->cookie = cookie;
> + *free_new_user = 0;
> + } else {
> + /* Update existing entry */
> + plist_del(&user->node, &pwrdm->wkup_lat_plist_head);
> + }
> +
> + plist_node_init(&user->node, min_latency);
> + plist_add(&user->node, &pwrdm->wkup_lat_plist_head);
> + } else {
> + if (user) {
> + /* Remove the constraint from the list */
> + plist_del(&user->node, &pwrdm->wkup_lat_plist_head);
> + *free_node = 1;
> + } else {
> + /* Constraint not existing or list empty, do nothing */
> + return -EINVAL;
> + }
> +
> + }
> +
> + return 0;
> +}
[...]
> /**
> + * pwrdm_set_wkup_lat_constraint - Set/update/remove a powerdomain wakeup
> + * latency constraint and apply it
> + * @pwrdm: struct powerdomain * which the constraint applies to
> + * @cookie: constraint identifier, used for tracking.
> + * @min_latency: minimum wakeup latency constraint (in microseconds) for
> + * the given pwrdm. The value of PM_QOS_DEV_LAT_DEFAULT_VALUE removes
> + * the constraint.
> + *
> + * Tracks the constraints by @cookie.
> + * Constraint set/update: Adds a new entry to powerdomain's wake-up latency
> + * constraint list.
> + * If the constraint identifier already exists in the list, the old value is
> + * overwritten.
> + * Constraint removal: Removes the identifier's entry from powerdomain's
> + * wakeup latency constraint list.
> + *
> + * Applies the aggregated constraint value for the given pwrdm by calling
> + * _pwrdm_wakeuplat_update_pwrst.
> + *
> + * Returns 0 upon success, -ENOMEM in case of memory shortage, -EINVAL in
> + * case of invalid parameters, or the return value from
> + * _pwrdm_wakeuplat_update_pwrst.
> + *
> + * The caller must check the validity of the parameters.
> + */
> +int pwrdm_set_wkup_lat_constraint(struct powerdomain *pwrdm, void *cookie,
> + long min_latency)
> +{
> + struct pwrdm_wkup_constraints_entry *user = NULL, *new_user = NULL;
> + int ret = 0, free_new_user = 0, free_node = 0;
> + long value = PM_QOS_DEV_LAT_DEFAULT_VALUE;
> + unsigned long flags;
> +
> + pr_debug("powerdomain: %s: pwrdm %s, cookie=0x%p, min_latency=%ld\n",
> + __func__, pwrdm->name, cookie, min_latency);
> +
> + if (min_latency != PM_QOS_DEV_LAT_DEFAULT_VALUE) {
> + new_user = kzalloc(sizeof(struct pwrdm_wkup_constraints_entry),
> + GFP_KERNEL);
> + if (!new_user) {
> + pr_err("%s: FATAL ERROR: kzalloc failed\n", __func__);
> + return -ENOMEM;
> + }
> + free_new_user = 1;
> + }
> +
> + spin_lock_irqsave(&pwrdm->wkup_lat_plist_lock, flags);
> +
> + /* Manage the constraints list */
> + ret = _pwrdm_update_wakeuplat_list(pwrdm, cookie, min_latency,
> + user, new_user,
> + &free_new_user, &free_node);
> +
> + /* Find the aggregated constraint value from the list */
> + if (!ret)
> + if (!plist_head_empty(&pwrdm->wkup_lat_plist_head))
> + value = plist_first(&pwrdm->wkup_lat_plist_head)->prio;
> +
> + spin_unlock_irqrestore(&pwrdm->wkup_lat_plist_lock, flags);
> +
> + if (free_node)
> + kfree(user);
> +
> + if (free_new_user)
> + kfree(new_user);
The alloc/free of these buffers is not terribly obvious when reading. I
think the code/changelog needs some comments describing the logic
behind how/when these nodes are allocated and freed.
> + /* Apply the constraint to the pwrdm */
> + if (!ret) {
> + pr_debug("powerdomain: %s: pwrdm %s, value=%ld\n",
> + __func__, pwrdm->name, value);
> + ret = _pwrdm_wakeuplat_update_pwrst(pwrdm, value);
> + }
> +
> + return ret;
> +}
> +
Kevin
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
