On Tue, Nov 29, 2011 at 8:45 PM, Kevin Hilman <[email protected]> wrote: > "DebBarma, Tarun Kanti" <[email protected]> writes: > >> On Fri, Nov 4, 2011 at 2:57 PM, DebBarma, Tarun Kanti >> <[email protected]> wrote: >>> On Fri, Nov 4, 2011 at 3:14 AM, Kevin Hilman <[email protected]> wrote: >>>> Tarun Kanti DebBarma <[email protected]> writes: >>>> >>>>> This series is continuation of cleanup of OMAP GPIO driver and fixes. >>>> >>>> Using this series on 3630/Zoom3, UART wakeups no longer work from >>>> suspend. That suggests that GPIO wakeups from retention/off are not >>>> working. >>>> >>>> Please test GPIO wakeups from retention/off. One way is to use Zoom3 >>>> UART wakeup from suspend using by enabling UART wakeups and suspending: >>>> >>>> # echo enabled > >>>> /sys/devices/platform/serial8250.0/tty/ttyS0/power/wakeup >>>> # echo mem > /sys/power/state >>> Ok, I will test and make necessary fix. >> I have done retention test of the latest series on Zoom3. When I try >> running off mode >> test it says support is not present because of an errata. > > Specifically, CORE off is not supported on that rev of 36xx due to an > errata. Can you try on a newer 36xx? > >> Here is the overall log: > > The rest of the dump seems to point to an MMC driver problem. Please > take this with the MMC driver folks. Hi Tarun,
Can you try with this patch queued in mmc-next for MMC warning http://article.gmane.org/gmane.linux.kernel.mmc/10961 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
