Since IO Daisychain modifies only PRM registers, it makes sense to move it to PRM File.
Signed-off-by: Vishwanath BS <[email protected]> Tested-by: Govindraj.R <[email protected]> --- arch/arm/mach-omap2/pm34xx.c | 30 +----------------------------- arch/arm/mach-omap2/prm2xxx_3xxx.c | 33 +++++++++++++++++++++++++++++++++ arch/arm/mach-omap2/prm2xxx_3xxx.h | 14 ++++++++++++++ 3 files changed, 48 insertions(+), 29 deletions(-) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 074688b..448e620 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -96,34 +96,6 @@ static inline void omap3_per_restore_context(void) omap_gpio_restore_context(); } -static void omap3_enable_io_chain(void) -{ - int timeout = 0; - - omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, - PM_WKEN); - /* Do a readback to assure write has been done */ - omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN); - - while (!(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST) & - OMAP3430_ST_IO_CHAIN_MASK)) { - timeout++; - if (timeout > 1000) { - pr_err("Wake up daisy chain activation failed.\n"); - return; - } - } - omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, - PM_WKEN); - -} - -static void omap3_disable_io_chain(void) -{ - omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, - PM_WKEN); -} - static void omap3_core_save_context(void) { omap3_ctrl_save_padconf(); @@ -335,7 +307,7 @@ void omap_sram_idle(void) core_next_state < PWRDM_POWER_ON)) { omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN); if (omap3_has_io_chain_ctrl()) - omap3_enable_io_chain(); + omap3_trigger_wuclk_ctrl(); } /* Block console output in case it is on one of the OMAP UARTs */ diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c index 2a4a678..6db5935 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c @@ -227,6 +227,39 @@ u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset) return omap2_prm_rmw_mod_reg_bits(mask, bits, OMAP3430_GR_MOD, offset); } +/** + * Maximum time(us) it takes to output the signal WUCLKOUT of the last pad of + * the I/O ring after asserting WUCLKIN high + */ +#define MAX_IOPAD_LATCH_TIME 1000 + +/* OMAP3 Daisychain trigger sequence */ +void omap3_trigger_wuclk_ctrl(void) +{ + int i = 0; + + omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, + PM_WKEN); + /* Do a readback to assure write has been done */ + omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN); + + omap_test_timeout( + (((omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST) & + OMAP3430_ST_IO_CHAIN_MASK) == 1)), + MAX_IOPAD_LATCH_TIME, i); + + omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, + PM_WKEN); +} + +/* OMAP3 Daisychain disable sequence */ +void omap3_disable_io_chain(void) +{ + if (omap_rev() >= OMAP3430_REV_ES3_1) + omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, + PM_WKEN); +} + static int __init omap3xxx_prcm_init(void) { if (cpu_is_omap34xx()) diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h index cef533d..e6f8206 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.h +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h @@ -289,6 +289,18 @@ static inline int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, "not suppose to be used on omap4\n"); return 0; } +static inline void omap3_trigger_wuclk_ctrl(void) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function and " + "not suppose to be used on omap4\n"); + return 0; +} +static inline void omap3_disable_io_chain(void) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function and " + "not suppose to be used on omap4\n"); + return 0; +} #else /* Power/reset management domain register get/set */ extern u32 omap2_prm_read_mod_reg(s16 module, u16 idx); @@ -302,6 +314,8 @@ extern u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask); extern int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift); extern int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift); extern int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift); +extern void omap3_trigger_wuclk_ctrl(void); +extern void omap3_disable_io_chain(void); /* OMAP3-specific VP functions */ u32 omap3_prm_vp_check_txdone(u8 vp_id); -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
