* Janusz Krzysztofik <[email protected]> [111219 14:41]:
> Don't use Amstrad Delta custom I/O functions for controlling the device,
> use GPIO API instead.
> 
> While being at it, add missing gpio_free(AMS_DELTA_GPIO_PIN_NAND_RB).
> 
> Depends on patch 2/7 "ARM: OMAP1: ams-delta: convert latches to
> basic_mmio_gpio"
> 
> Signed-off-by: Janusz Krzysztofik <[email protected]>
> Cc: David Woodhouse <[email protected]>
> Cc: Tony Lindgren <[email protected]>

Artem, care to ack this one?

Regards,

Tony


> ---
> Changes against initial version:
> * no functional changes,
> * rebased on top of v2 of patch 2/7, just in case.
> 
> Comments copied from initial submission:
> 
> Hi,
> I considered dropping the Amstrad Delta NAND driver and moving to either
> gpio-nand or gen_nand, but finally decided to keep it for now.
> 
> The problem with the gpio-nand is that it seems to match a different
> hardware interface model. Having no knowledge about the original
> hardware that driver was designed in mind, I'd rather not try to
> modify it, and creating another GPIO based NAND driver also seems not
> a really good idea.
> 
> If I decided to use gen_nand instead, I would have to move virtually all
> of the old driver callback functions somewhere under arch, either to the
> board file or to a new one, and still use some hacks unless either
> nand_base.c or plat_nand.c is modified.
> 
> I'm willing to take one of those two approaches in a follow up series if
> I get a positive feedback.
> 
> Thanks,
> Janusz
> 
> 
>  arch/arm/mach-omap1/board-ams-delta.c             |   30 --------
>  arch/arm/plat-omap/include/plat/board-ams-delta.h |    6 --
>  drivers/mtd/nand/ams-delta.c                      |   74 ++++++++++++++------
>  3 files changed, 52 insertions(+), 58 deletions(-)
> 
> diff --git a/arch/arm/mach-omap1/board-ams-delta.c 
> b/arch/arm/mach-omap1/board-ams-delta.c
> index 034d009..cc6f962 100644
> --- a/arch/arm/mach-omap1/board-ams-delta.c
> +++ b/arch/arm/mach-omap1/board-ams-delta.c
> @@ -237,36 +237,6 @@ static struct gpio latch_gpios[] __initconst = {
>               .label  = "lcd_ndisp",
>       },
>       {
> -             .gpio   = AMS_DELTA_GPIO_PIN_NAND_NCE,
> -             .flags  = GPIOF_OUT_INIT_LOW,
> -             .label  = "nand_nce",
> -     },
> -     {
> -             .gpio   = AMS_DELTA_GPIO_PIN_NAND_NRE,
> -             .flags  = GPIOF_OUT_INIT_LOW,
> -             .label  = "nand_nre",
> -     },
> -     {
> -             .gpio   = AMS_DELTA_GPIO_PIN_NAND_NWP,
> -             .flags  = GPIOF_OUT_INIT_LOW,
> -             .label  = "nand_nwp",
> -     },
> -     {
> -             .gpio   = AMS_DELTA_GPIO_PIN_NAND_NWE,
> -             .flags  = GPIOF_OUT_INIT_LOW,
> -             .label  = "nand_nwe",
> -     },
> -     {
> -             .gpio   = AMS_DELTA_GPIO_PIN_NAND_ALE,
> -             .flags  = GPIOF_OUT_INIT_LOW,
> -             .label  = "nand_ale",
> -     },
> -     {
> -             .gpio   = AMS_DELTA_GPIO_PIN_NAND_CLE,
> -             .flags  = GPIOF_OUT_INIT_LOW,
> -             .label  = "nand_cle",
> -     },
> -     {
>               .gpio   = AMS_DELTA_GPIO_PIN_KEYBRD_PWR,
>               .flags  = GPIOF_OUT_INIT_LOW,
>               .label  = "keybrd_pwr",
> diff --git a/arch/arm/plat-omap/include/plat/board-ams-delta.h 
> b/arch/arm/plat-omap/include/plat/board-ams-delta.h
> index a0f86ca..3e57833 100644
> --- a/arch/arm/plat-omap/include/plat/board-ams-delta.h
> +++ b/arch/arm/plat-omap/include/plat/board-ams-delta.h
> @@ -30,12 +30,6 @@
>  
>  #define AMS_DELTA_LATCH2_LCD_VBLEN   0x0001
>  #define AMS_DELTA_LATCH2_LCD_NDISP   0x0002
> -#define AMS_DELTA_LATCH2_NAND_NCE    0x0004
> -#define AMS_DELTA_LATCH2_NAND_NRE    0x0008
> -#define AMS_DELTA_LATCH2_NAND_NWP    0x0010
> -#define AMS_DELTA_LATCH2_NAND_NWE    0x0020
> -#define AMS_DELTA_LATCH2_NAND_ALE    0x0040
> -#define AMS_DELTA_LATCH2_NAND_CLE    0x0080
>  #define AMD_DELTA_LATCH2_KEYBRD_PWR  0x0100
>  #define AMD_DELTA_LATCH2_KEYBRD_DATA 0x0200
>  #define AMD_DELTA_LATCH2_SCARD_RSTIN 0x0400
> diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c
> index 9e6b498..5769bd2 100644
> --- a/drivers/mtd/nand/ams-delta.c
> +++ b/drivers/mtd/nand/ams-delta.c
> @@ -26,7 +26,7 @@
>  #include <asm/io.h>
>  #include <mach/hardware.h>
>  #include <asm/sizes.h>
> -#include <asm/gpio.h>
> +#include <linux/gpio.h>
>  #include <plat/board-ams-delta.h>
>  
>  /*
> @@ -34,8 +34,6 @@
>   */
>  static struct mtd_info *ams_delta_mtd = NULL;
>  
> -#define NAND_MASK (AMS_DELTA_LATCH2_NAND_NRE | AMS_DELTA_LATCH2_NAND_NWE | 
> AMS_DELTA_LATCH2_NAND_CLE | AMS_DELTA_LATCH2_NAND_ALE | 
> AMS_DELTA_LATCH2_NAND_NCE | AMS_DELTA_LATCH2_NAND_NWP)
> -
>  /*
>   * Define partitions for flash devices
>   */
> @@ -68,10 +66,9 @@ static void ams_delta_write_byte(struct mtd_info *mtd, 
> u_char byte)
>  
>       writew(0, io_base + OMAP_MPUIO_IO_CNTL);
>       writew(byte, this->IO_ADDR_W);
> -     ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_NWE, 0);
> +     gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NWE, 0);
>       ndelay(40);
> -     ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_NWE,
> -                            AMS_DELTA_LATCH2_NAND_NWE);
> +     gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NWE, 1);
>  }
>  
>  static u_char ams_delta_read_byte(struct mtd_info *mtd)
> @@ -80,12 +77,11 @@ static u_char ams_delta_read_byte(struct mtd_info *mtd)
>       struct nand_chip *this = mtd->priv;
>       void __iomem *io_base = this->priv;
>  
> -     ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_NRE, 0);
> +     gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NRE, 0);
>       ndelay(40);
>       writew(~0, io_base + OMAP_MPUIO_IO_CNTL);
>       res = readw(this->IO_ADDR_R);
> -     ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_NRE,
> -                            AMS_DELTA_LATCH2_NAND_NRE);
> +     gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NRE, 1);
>  
>       return res;
>  }
> @@ -132,15 +128,12 @@ static void ams_delta_hwcontrol(struct mtd_info *mtd, 
> int cmd,
>  {
>  
>       if (ctrl & NAND_CTRL_CHANGE) {
> -             unsigned long bits;
> -
> -             bits = (~ctrl & NAND_NCE) ? AMS_DELTA_LATCH2_NAND_NCE : 0;
> -             bits |= (ctrl & NAND_CLE) ? AMS_DELTA_LATCH2_NAND_CLE : 0;
> -             bits |= (ctrl & NAND_ALE) ? AMS_DELTA_LATCH2_NAND_ALE : 0;
> -
> -             ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_CLE |
> -                             AMS_DELTA_LATCH2_NAND_ALE |
> -                             AMS_DELTA_LATCH2_NAND_NCE, bits);
> +             gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NCE,
> +                             (ctrl & NAND_NCE) == 0);
> +             gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_CLE,
> +                             (ctrl & NAND_CLE) != 0);
> +             gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_ALE,
> +                             (ctrl & NAND_ALE) != 0);
>       }
>  
>       if (cmd != NAND_CMD_NONE)
> @@ -152,6 +145,39 @@ static int ams_delta_nand_ready(struct mtd_info *mtd)
>       return gpio_get_value(AMS_DELTA_GPIO_PIN_NAND_RB);
>  }
>  
> +static struct gpio _mandatory_gpio[] __initconst_or_module = {
> +     {
> +             .gpio   = AMS_DELTA_GPIO_PIN_NAND_NCE,
> +             .flags  = GPIOF_OUT_INIT_HIGH,
> +             .label  = "nand_nce",
> +     },
> +     {
> +             .gpio   = AMS_DELTA_GPIO_PIN_NAND_NRE,
> +             .flags  = GPIOF_OUT_INIT_HIGH,
> +             .label  = "nand_nre",
> +     },
> +     {
> +             .gpio   = AMS_DELTA_GPIO_PIN_NAND_NWP,
> +             .flags  = GPIOF_OUT_INIT_HIGH,
> +             .label  = "nand_nwp",
> +     },
> +     {
> +             .gpio   = AMS_DELTA_GPIO_PIN_NAND_NWE,
> +             .flags  = GPIOF_OUT_INIT_HIGH,
> +             .label  = "nand_nwe",
> +     },
> +     {
> +             .gpio   = AMS_DELTA_GPIO_PIN_NAND_ALE,
> +             .flags  = GPIOF_OUT_INIT_LOW,
> +             .label  = "nand_ale",
> +     },
> +     {
> +             .gpio   = AMS_DELTA_GPIO_PIN_NAND_CLE,
> +             .flags  = GPIOF_OUT_INIT_LOW,
> +             .label  = "nand_cle",
> +     },
> +};
> +
>  /*
>   * Main initialization routine
>   */
> @@ -223,10 +249,9 @@ static int __devinit ams_delta_init(struct 
> platform_device *pdev)
>       platform_set_drvdata(pdev, io_base);
>  
>       /* Set chip enabled, but  */
> -     ams_delta_latch2_write(NAND_MASK, AMS_DELTA_LATCH2_NAND_NRE |
> -                                       AMS_DELTA_LATCH2_NAND_NWE |
> -                                       AMS_DELTA_LATCH2_NAND_NCE |
> -                                       AMS_DELTA_LATCH2_NAND_NWP);
> +     err = gpio_request_array(_mandatory_gpio, ARRAY_SIZE(_mandatory_gpio));
> +     if (err)
> +             goto out_gpio;
>  
>       /* Scan to find existence of the device */
>       if (nand_scan(ams_delta_mtd, 1)) {
> @@ -241,7 +266,10 @@ static int __devinit ams_delta_init(struct 
> platform_device *pdev)
>       goto out;
>  
>   out_mtd:
> +     gpio_free_array(_mandatory_gpio, ARRAY_SIZE(_mandatory_gpio));
> +out_gpio:
>       platform_set_drvdata(pdev, NULL);
> +     gpio_free(AMS_DELTA_GPIO_PIN_NAND_RB);
>       iounmap(io_base);
>  out_release_io:
>       release_mem_region(res->start, resource_size(res));
> @@ -262,6 +290,8 @@ static int __devexit ams_delta_cleanup(struct 
> platform_device *pdev)
>       /* Release resources, unregister device */
>       nand_release(ams_delta_mtd);
>  
> +     gpio_free_array(_mandatory_gpio, ARRAY_SIZE(_mandatory_gpio));
> +     gpio_free(AMS_DELTA_GPIO_PIN_NAND_RB);
>       iounmap(io_base);
>       release_mem_region(res->start, resource_size(res));
>  
> -- 
> 1.7.3.4
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to