following statement can only change device size from 8-bit(0) to 16-bit(1),
but not vice versa:
regval |= GPMC_CONFIG1_DEVICESIZE(wval);
so as this field has 1 reserved bit, that could be used in future,
just clear both bits and then OR with the desired value
Signed-off-by: Yegor Yefremov <yegorsli...@googlemail.com>
---
arch/arm/mach-omap2/gpmc.c | 6 ++++++
1 file changed, 6 insertions(+)
Index: b/arch/arm/mach-omap2/gpmc.c
===================================================================
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -528,7 +528,13 @@
case GPMC_CONFIG_DEV_SIZE:
regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+
+ /* clear 2 target bits */
+ regval &= ~GPMC_CONFIG1_DEVICESIZE(3);
+
+ /* set the proper value */
regval |= GPMC_CONFIG1_DEVICESIZE(wval);
+
gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval);
break;
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
