When the MCLK is used to drive the Audio Clock Regeneration packets, the initialization procedure is to set ACR_CTRL[2] to 0 and then back again to 1. Also, devices that do not support the MCLK, use the TMDS clock directly by leaving ACR_CTRL[2] set to 0.
The MLCK clock divisor, mclk_mode, is configured only if MLCK is used. Such configuration is no longer related to the CTS mode as in some silicon revisions CTS SW-mode is used along with the MCLK. Signed-off-by: Ricardo Neri <[email protected]> --- drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c | 37 +++++++++++++++++----------- 1 files changed, 22 insertions(+), 15 deletions(-) diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c index 9af81f1..0150e21 100644 --- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c +++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c @@ -1023,13 +1023,9 @@ void hdmi_core_audio_config(struct hdmi_ip_data *ip_data, u32 r; void __iomem *av_base = hdmi_av_base(ip_data); - /* audio clock recovery parameters */ - r = hdmi_read_reg(av_base, HDMI_CORE_AV_ACR_CTRL); - r = FLD_MOD(r, cfg->use_mclk, 2, 2); - r = FLD_MOD(r, cfg->en_acr_pkt, 1, 1); - r = FLD_MOD(r, cfg->cts_mode, 0, 0); - hdmi_write_reg(av_base, HDMI_CORE_AV_ACR_CTRL, r); - + /* + * Parameters for generation of Audio Clock Recovery packets + */ REG_FLD_MOD(av_base, HDMI_CORE_AV_N_SVAL1, cfg->n, 7, 0); REG_FLD_MOD(av_base, HDMI_CORE_AV_N_SVAL2, cfg->n >> 8, 7, 0); REG_FLD_MOD(av_base, HDMI_CORE_AV_N_SVAL3, cfg->n >> 16, 7, 0); @@ -1041,14 +1037,6 @@ void hdmi_core_audio_config(struct hdmi_ip_data *ip_data, REG_FLD_MOD(av_base, HDMI_CORE_AV_CTS_SVAL3, cfg->cts >> 16, 7, 0); } else { - /* - * HDMI IP uses this configuration to divide the MCLK to - * update CTS value. - */ - REG_FLD_MOD(av_base, - HDMI_CORE_AV_FREQ_SVAL, cfg->mclk_mode, 2, 0); - - /* Configure clock for audio packets */ REG_FLD_MOD(av_base, HDMI_CORE_AV_AUD_PAR_BUSCLK_1, cfg->aud_par_busclk, 7, 0); REG_FLD_MOD(av_base, HDMI_CORE_AV_AUD_PAR_BUSCLK_2, @@ -1057,6 +1045,25 @@ void hdmi_core_audio_config(struct hdmi_ip_data *ip_data, (cfg->aud_par_busclk >> 16), 7, 0); } + /* Set ACR clock divisor */ + REG_FLD_MOD(av_base, + HDMI_CORE_AV_FREQ_SVAL, cfg->mclk_mode, 2, 0); + + r = hdmi_read_reg(av_base, HDMI_CORE_AV_ACR_CTRL); + /* + * Use TMDS clock for ACR packets. For devices that use + * the MCLK, this is the first part of the MCLK initialization. + */ + r = FLD_MOD(r, 0, 2, 2); + + r = FLD_MOD(r, cfg->en_acr_pkt, 1, 1); + r = FLD_MOD(r, cfg->cts_mode, 0, 0); + hdmi_write_reg(av_base, HDMI_CORE_AV_ACR_CTRL, r); + + /* For devices using MCLK, this completes its initialization. */ + if (cfg->use_mclk) + REG_FLD_MOD(av_base, HDMI_CORE_AV_ACR_CTRL, 1, 2, 2); + /* Override of SPDIF sample frequency with value in I2S_CHST4 */ REG_FLD_MOD(av_base, HDMI_CORE_AV_SPDIF_CTRL, cfg->fs_override, 1, 1); -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
