From: "Arnout Vandecappelle (Essensium/Mind)" <[email protected]>
The omap3evm BSP enables a GPIO LED on the twl4030 chip. However, the static gpio_leds array doesn't have an entry for it. This is most likely a copy-and-paste error, because it has been in there since the first commit of the omap3evm BSP (53c5ec31). Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <[email protected]> --- Please CC me, I'm not on the list. Since I don't have access to an OMAP3EVM board or schematics, I couldn't actually test if my fix is correct. I discovered the error because I'm using this BSP for an AM37xEVM board - which has the LED connected to a different GPIO. It works on the AM37xEVM board if I replace the assignment with the correct GPIO number (8). --- arch/arm/mach-omap2/board-omap3evm.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index ec00b2e..f6f5cd4 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -381,7 +381,7 @@ static int omap3evm_twl_gpio_setup(struct device *dev, gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI"); /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ - gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; + gpio_leds[0].gpio = gpio + TWL4030_GPIO_MAX + 1; platform_device_register(&leds_gpio); -- 1.7.8.3 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
