This is applied when PMIC is entering or leaving a sleep mode.
Signed-off-by: Tero Kristo <[email protected]>
---
arch/arm/mach-omap2/voltage.h | 4 ++++
1 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h
index 940a0d6..54b959c 100644
--- a/arch/arm/mach-omap2/voltage.h
+++ b/arch/arm/mach-omap2/voltage.h
@@ -145,6 +145,8 @@ struct omap_volt_data {
* @i2c_slave_addr: I2C slave address of PMIC
* @volt_reg_addr: voltage configuration register address
* @cmd_reg_addr: command (on, on-LP, ret, off) configuration register address
+ * @startup_time: PMIC startup time, only valid for core domain
+ * @shutdown_time: PMIC shutdown time, only valid for core domain
* @i2c_high_speed: whether VC uses I2C high-speed mode to PMIC
* @i2c_mcode: master code value for I2C high-speed preamble transmission
* @vsel_to_uv: PMIC API to convert vsel value to actual voltage in uV.
@@ -162,6 +164,8 @@ struct omap_voltdm_pmic {
u8 vp_vstepmax;
u32 vddmin;
u32 vddmax;
+ u32 startup_time;
+ u32 shutdown_time;
u8 vp_timeout_us;
bool i2c_high_speed;
u8 i2c_mcode;
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
