On Wed, Feb 22, 2012 at 22:15:03, Porter, Matt wrote:
> This fixes smsc911x support on platforms using gpmc_smsc911x_init().
>
> Commit c7e963f6888816 (net/smsc911x: Add regulator support) added
> the requirement that platforms provide vdd33a and vddvario supplies.
>
> Signed-off-by: Matt Porter <[email protected]>
> ---
> Changes for v2:
> - temporary fix to avoid platform device id conflicts
> - add commit summary from the smsc911x regulator support commit
> - incorporate platform device registration error cause reporting
>
> arch/arm/mach-omap2/gpmc-smsc911x.c | 54
> ++++++++++++++++++++++++++++++++++-
> 1 files changed, 53 insertions(+), 1 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c
> b/arch/arm/mach-omap2/gpmc-smsc911x.c
> index 9970331..a7388ed 100644
> --- a/arch/arm/mach-omap2/gpmc-smsc911x.c
> +++ b/arch/arm/mach-omap2/gpmc-smsc911x.c
> @@ -19,6 +19,8 @@
> #include <linux/interrupt.h>
> #include <linux/io.h>
> #include <linux/smsc911x.h>
> +#include <linux/regulator/fixed.h>
> +#include <linux/regulator/machine.h>
>
> #include <plat/board.h>
> #include <plat/gpmc.h>
> @@ -42,6 +44,50 @@ static struct smsc911x_platform_config
> gpmc_smsc911x_config = {
> .flags = SMSC911X_USE_16BIT,
> };
>
> +static struct regulator_consumer_supply gpmc_smsc911x_supply[] = {
> + REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
> + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
> +};
> +
> +/* Generic regulator definition to satisfy smsc911x */
> +static struct regulator_init_data gpmc_smsc911x_reg_init_data = {
> + .constraints = {
> + .min_uV = 3300000,
> + .max_uV = 3300000,
> + .valid_modes_mask = REGULATOR_MODE_NORMAL
> + | REGULATOR_MODE_STANDBY,
> + .valid_ops_mask = REGULATOR_CHANGE_MODE
> + | REGULATOR_CHANGE_STATUS,
> + },
> + .num_consumer_supplies = ARRAY_SIZE(gpmc_smsc911x_supply),
> + .consumer_supplies = gpmc_smsc911x_supply,
> +};
> +
> +static struct fixed_voltage_config gpmc_smsc911x_fixed_reg_data = {
> + .supply_name = "gpmc_smsc911x",
> + .microvolts = 3300000,
> + .gpio = -EINVAL,
> + .startup_delay = 0,
> + .enable_high = 0,
> + .enabled_at_boot = 1,
> + .init_data = &gpmc_smsc911x_reg_init_data,
> +};
> +
> +/*
> + * Platform device id of 42 is a temporary fix to avoid conflicts
> + * with other reg-fixed-voltage devices. The real fix should
> + * involve the driver core providing a way of dynamically
> + * assigning a unique id on registration for platform devices
> + * in the same name space.
> + */
> +static struct platform_device gpmc_smsc911x_regulator = {
> + .name = "reg-fixed-voltage",
> + .id = 42,
> + .dev = {
> + .platform_data = &gpmc_smsc911x_fixed_reg_data,
> + },
> +};
> +
> /*
> * Initialize smsc911x device connected to the GPMC. Note that we
> * assume that pin multiplexing is done in the board-*.c file,
> @@ -51,10 +97,16 @@ void __init gpmc_smsc911x_init(struct
> omap_smsc911x_platform_data *board_data)
> {
> struct platform_device *pdev;
> unsigned long cs_mem_base;
> - int ret;
> + int ret, err;
>
Do you really need another variable here? Can't you use "ret" here?
Thanks,
Vaibhav
> gpmc_cfg = board_data;
>
> + err = platform_device_register(&gpmc_smsc911x_regulator);
> + if (err < 0) {
> + pr_err("Unable to register smsc911x regulators: %d\n", err);
> + return;
> + }
> +
> if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
> pr_err("Failed to request GPMC mem region\n");
> return;
> --
> 1.7.5.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
