Hi,

* Mircea Gherzan <[email protected]> [120305 16:15]:
> The "uim" deamon requires sysfs entries that are filled in using
> this platform data.
> 
> Signed-off-by: Mircea Gherzan <[email protected]>
> ---
>  arch/arm/mach-omap2/board-omap4panda.c |   23 +++++++++++++++++------
>  include/linux/ti_wilink_st.h           |    2 ++
>  2 files changed, 19 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/board-omap4panda.c 
> b/arch/arm/mach-omap2/board-omap4panda.c
> index b1d74d6..37b437f 100644
> --- a/arch/arm/mach-omap2/board-omap4panda.c
> +++ b/arch/arm/mach-omap2/board-omap4panda.c
> @@ -27,6 +27,7 @@
>  #include <linux/i2c/twl.h>
>  #include <linux/regulator/machine.h>
>  #include <linux/regulator/fixed.h>
> +#include <linux/ti_wilink_st.h>
>  #include <linux/wl12xx.h>
>  
>  #include <mach/hardware.h>
> @@ -56,15 +57,29 @@
>  #define HDMI_GPIO_HPD  63 /* Hotplug detect */
>  
>  /* wl127x BT, FM, GPS connectivity chip */
> -static int wl1271_gpios[] = {46, -1, -1};
> +static struct ti_st_plat_data wilink_platform_data = {
> +        .nshutdown_gpio      = 46,
> +        .dev_name    = "/dev/ttyO1",
> +        .flow_cntrl  = 1,
> +        .baud_rate   = 3000000,
> +     .chip_enable    = NULL,
> +        .suspend     = NULL,
> +        .resume              = NULL,
> +};
> +

Please use tabs above before .xxx instead of spaces.

> +static struct platform_device btwilink_device = {
> +     .name   = "btwilink",
> +     .id     = -1,
> +};
> +
>  static struct gpio_led gpio_leds[] = {
>       {
>               .name                   = "pandaboard::status1",
> @@ -91,10 +106,6 @@ static struct platform_device leds_gpio = {
>       },
>  };
>  
> -static struct platform_device btwilink_device = {
> -     .name   = "btwilink",
> -     .id     = -1,
> -};

This change is probably not needed, right?

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to