The "uim" deamon requires sysfs entries that are filled in using this platform data.
Signed-off-by: Mircea Gherzan <[email protected]> --- arch/arm/mach-omap2/board-omap4panda.c | 14 ++++++++++++-- include/linux/ti_wilink_st.h | 2 ++ 2 files changed, 14 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index b1d74d6..339e781 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -27,6 +27,7 @@ #include <linux/i2c/twl.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> +#include <linux/ti_wilink_st.h> #include <linux/wl12xx.h> #include <mach/hardware.h> @@ -56,12 +57,21 @@ #define HDMI_GPIO_HPD 63 /* Hotplug detect */ /* wl127x BT, FM, GPS connectivity chip */ -static int wl1271_gpios[] = {46, -1, -1}; +static struct ti_st_plat_data wilink_platform_data = { + .nshutdown_gpio = 46, + .dev_name = "/dev/ttyO1", + .flow_cntrl = 1, + .baud_rate = 3000000, + .chip_enable = NULL, + .suspend = NULL, + .resume = NULL, +}; + static struct platform_device wl1271_device = { .name = "kim", .id = -1, .dev = { - .platform_data = &wl1271_gpios, + .platform_data = &wilink_platform_data, }, }; diff --git a/include/linux/ti_wilink_st.h b/include/linux/ti_wilink_st.h index 2ef4385..3ca0269 100644 --- a/include/linux/ti_wilink_st.h +++ b/include/linux/ti_wilink_st.h @@ -25,6 +25,8 @@ #ifndef TI_WILINK_ST_H #define TI_WILINK_ST_H +#include <linux/skbuff.h> + /** * enum proto-type - The protocol on WiLink chips which share a * common physical interface like UART. -- 1.7.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
