Resolve some warnings identified by cppcheck in arch/arm/mach-omap2:
[arch/arm/mach-omap2/usb-tusb6010.c:129]: (style) Checking if unsigned
variable 'tmp' is less than zero.
[arch/arm/mach-omap2/prm_common.c:241]: (error) Possible null pointer
dereference: irq_setup - otherwise it is redundant to check if irq_setup is
null at line 247
[arch/arm/mach-omap2/pm34xx.c:790]: (style) Variable 'per_clkdm' is
assigned a value that is never used
[arch/arm/mach-omap2/pm34xx.c:790]: (style) Variable 'core_clkdm' is
assigned a value that is never used
[arch/arm/mach-omap2/pm24xx.c:185]: (style) Variable 'only_idle' is
assigned a value that is never used
[arch/arm/mach-omap2/mux.c:254]: (error) Possible null pointer dereference:
mux
[arch/arm/mach-omap2/mux.c:258]: (error) Possible null pointer dereference:
mux
[arch/arm/mach-omap2/mcbsp.c:133]: (warning) scanf without field width
limits can crash with huge input data
[arch/arm/mach-omap2/gpmc-onenand.c:178]: (style) Variable 'tick_ns' is
assigned a value that is never used
[arch/arm/mach-omap2/gpio.c:43]: (warning) scanf without field width limits
can crash with huge input data
[arch/arm/mach-omap2/gpio.c:56]: (error) Possible null pointer dereference:
pdata - otherwise it is redundant to check if pdata is null at line 57
[arch/arm/mach-omap2/devices.c:45]: (style) Variable 'l' is assigned a
value that is never used
[arch/arm/mach-omap2/board-am3517evm.c:134]: (style) Variable 'regval' is
assigned a value that is never used
Some of them are pretty good catches, such the gpio.c:56 and
usb-tusb6010.c:129.
Signed-off-by: Paul Walmsley <[email protected]>
Cc: Felipe Balbi <[email protected]>
Cc: Tony Lindgren <[email protected]>
Cc: Kevin Hilman <[email protected]>
Cc: Peter Ujfalusi <[email protected]>
Cc: Jarkko Nikula <[email protected]>
Cc: Charulatha Varadarajan <[email protected]>
---
arch/arm/mach-omap2/board-am3517evm.c | 6 +-----
arch/arm/mach-omap2/board-omap3evm.c | 8 ++++----
arch/arm/mach-omap2/devices.c | 3 +--
arch/arm/mach-omap2/gpio.c | 4 ++--
arch/arm/mach-omap2/gpmc-onenand.c | 3 +--
arch/arm/mach-omap2/mcbsp.c | 2 +-
arch/arm/mach-omap2/mux.c | 2 +-
arch/arm/mach-omap2/pm24xx.c | 3 ---
arch/arm/mach-omap2/pm34xx.c | 4 +---
arch/arm/mach-omap2/prm_common.c | 4 +++-
arch/arm/mach-omap2/usb-tusb6010.c | 2 +-
11 files changed, 16 insertions(+), 25 deletions(-)
diff --git a/arch/arm/mach-omap2/board-am3517evm.c
b/arch/arm/mach-omap2/board-am3517evm.c
index 4b1cfe3..24b1f9a 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -150,13 +150,9 @@ static void am3517_evm_ethernet_init(struct
emac_platform_data *pdata)
regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
regval = regval & (~(AM35XX_CPGMACSS_SW_RST));
omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
- regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
-
- return ;
+ omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
}
-
-
#define LCD_PANEL_PWR 176
#define LCD_PANEL_BKLIGHT_PWR 182
#define LCD_PANEL_PWM 181
diff --git a/arch/arm/mach-omap2/board-omap3evm.c
b/arch/arm/mach-omap2/board-omap3evm.c
index c877236..becf41d 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -634,12 +634,12 @@ static void __init omap3_evm_wl12xx_init(void)
static void __init omap3_evm_init(void)
{
+ static struct omap_board_mux *obm;
+
omap3_evm_get_revision();
- if (cpu_is_omap3630())
- omap3_mux_init(omap36x_board_mux, OMAP_PACKAGE_CBB);
- else
- omap3_mux_init(omap35x_board_mux, OMAP_PACKAGE_CBB);
+ obm = (cpu_is_omap3630()) ? omap36x_board_mux : omap35x_board_mux;
+ omap3_mux_init(obm, OMAP_PACKAGE_CBB);
omap_board_config = omap3_evm_config;
omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 283d11e..b52cd16 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -42,7 +42,6 @@
static int __init omap3_l3_init(void)
{
- int l;
struct omap_hwmod *oh;
struct platform_device *pdev;
char oh_name[L3_MODULES_MAX_LEN];
@@ -54,7 +53,7 @@ static int __init omap3_l3_init(void)
if (!(cpu_is_omap34xx()))
return -ENODEV;
- l = snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main");
+ snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main");
oh = omap_hwmod_lookup(oh_name);
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index 8cbfbc2..f64fcb2 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -40,7 +40,7 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void
*unused)
* not change. If changed, make corresponding change here
* or make use of static variable mechanism to handle this.
*/
- sscanf(oh->name, "gpio%d", &id);
+ sscanf(oh->name, "gpio%1d", &id);
pdata = kzalloc(sizeof(struct omap_gpio_platform_data), GFP_KERNEL);
if (!pdata) {
@@ -54,7 +54,7 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void
*unused)
pdata->virtual_irq_start = IH_GPIO_BASE + 32 * (id - 1);
pdata->regs = kzalloc(sizeof(struct omap_gpio_reg_offs), GFP_KERNEL);
- if (!pdata) {
+ if (!pdata->regs) {
pr_err("gpio%d: Memory allocation failed\n", id);
return -ENOMEM;
}
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c
b/arch/arm/mach-omap2/gpmc-onenand.c
index 5cdce10..6ab726f 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -175,7 +175,7 @@ static int omap2_onenand_set_sync_mode(struct
omap_onenand_platform_data *cfg,
const int t_wpl = 40;
const int t_wph = 30;
int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo;
- int tick_ns, div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency;
+ int div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency;
int first_time = 0, hf = 0, vhf = 0, sync_read = 0, sync_write = 0;
int err, ticks_cez;
int cs = cfg->cs, freq = *freq_ptr;
@@ -239,7 +239,6 @@ static int omap2_onenand_set_sync_mode(struct
omap_onenand_platform_data *cfg,
break;
}
- tick_ns = gpmc_ticks_to_ns(1);
div = gpmc_cs_calc_divider(cs, min_gpmc_clk_period);
gpmc_clk_ns = gpmc_ticks_to_ns(div);
if (gpmc_clk_ns < 15) /* >66Mhz */
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index fb4bcf8..efe59c7 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -130,7 +130,7 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void
*unused)
struct omap_mcbsp_platform_data *pdata = NULL;
struct platform_device *pdev;
- sscanf(oh->name, "mcbsp%d", &id);
+ sscanf(oh->name, "mcbsp%1d", &id);
pdata = kzalloc(sizeof(struct omap_mcbsp_platform_data), GFP_KERNEL);
if (!pdata) {
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 611a0e3..552225a 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -248,7 +248,7 @@ int omap_mux_init_signal(const char *muxname, int val)
int mux_mode;
mux_mode = omap_mux_get_by_name(muxname, &partition, &mux);
- if (mux_mode < 0)
+ if (mux_mode < 0 || !mux)
return mux_mode;
old_mode = omap_mux_read(partition, mux->reg_offset);
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index 23de98d..b3a4765 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -182,8 +182,6 @@ static int omap2_allow_mpu_retention(void)
static void omap2_enter_mpu_retention(void)
{
- int only_idle = 0;
-
/* Putting MPU into the WFI state while a transfer is active
* seems to cause the I2C block to timeout. Why? Good question. */
if (omap2_i2c_active())
@@ -206,7 +204,6 @@ static void omap2_enter_mpu_retention(void)
omap2_prm_write_mod_reg(OMAP_LOGICRETSTATE_MASK, MPU_MOD,
OMAP2_PM_PWSTCTRL);
- only_idle = 1;
}
omap2_sram_idle();
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index fc69875..0b65785 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -787,7 +787,7 @@ static void __init pm_errata_configure(void)
static int __init omap3_pm_init(void)
{
struct power_state *pwrst, *tmp;
- struct clockdomain *neon_clkdm, *per_clkdm, *mpu_clkdm, *core_clkdm;
+ struct clockdomain *neon_clkdm, *mpu_clkdm;
int ret;
if (!cpu_is_omap34xx())
@@ -841,8 +841,6 @@ static int __init omap3_pm_init(void)
neon_clkdm = clkdm_lookup("neon_clkdm");
mpu_clkdm = clkdm_lookup("mpu_clkdm");
- per_clkdm = clkdm_lookup("per_clkdm");
- core_clkdm = clkdm_lookup("core_clkdm");
#ifdef CONFIG_SUSPEND
suspend_set_ops(&omap_pm_ops);
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 860118a..c7c7373 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -238,7 +238,7 @@ void omap_prcm_irq_complete(void)
*/
int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup)
{
- int nr_regs = irq_setup->nr_regs;
+ int nr_regs;
u32 mask[OMAP_PRCM_MAX_NR_PENDING_REG];
int offset, i;
struct irq_chip_generic *gc;
@@ -247,6 +247,8 @@ int omap_prcm_register_chain_handler(struct
omap_prcm_irq_setup *irq_setup)
if (!irq_setup)
return -EINVAL;
+ nr_regs = irq_setup->nr_regs;
+
if (prcm_irq_setup) {
pr_err("PRCM: already initialized; won't reinitialize\n");
return -EINVAL;
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c
b/arch/arm/mach-omap2/usb-tusb6010.c
index 994d8f5..db84a46 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -126,7 +126,7 @@ static int tusb_set_sync_mode(unsigned sysclk_ps, unsigned
fclk_ps)
tmp = (t.sync_clk + fclk_ps - 1) / fclk_ps;
if (tmp > 4)
return -ERANGE;
- if (tmp <= 0)
+ if (tmp == 0)
tmp = 1;
t.page_burst_access = (fclk_ps * tmp) / 1000;
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
