OMAPs cpufreq requires the frequency table support, but nothing ensures
that this is selected. This can result in configurations which fail to
build:
drivers/built-in.o:(.data+0x5238): undefined reference to
`cpufreq_freq_attr_scaling_available_freqs'
drivers/cpufreq/omap-cpufreq.c:88: undefined reference to
`cpufreq_frequency_table_target'
drivers/cpufreq/omap-cpufreq.c:60: undefined reference to
`cpufreq_frequency_table_verify'
drivers/cpufreq/omap-cpufreq.c:186: undefined reference to
`cpufreq_frequency_table_cpuinfo'
drivers/cpufreq/omap-cpufreq.c:190: undefined reference to
`cpufreq_frequency_table_get_attr'
Fix this by introducing a new configuration variable and having that
select CPU_FREQ_TABLE.
Signed-off-by: Russell King <rmk+ker...@arm.linux.org.uk>
---
arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c | 2 +-
arch/arm/mach-omap2/clock.c | 2 +-
arch/arm/mach-omap2/clock.h | 2 +-
arch/arm/plat-omap/clock.c | 2 +-
arch/arm/plat-omap/include/plat/clock.h | 4 ++--
drivers/cpufreq/Kconfig.arm | 5 +++++
drivers/cpufreq/Makefile | 2 +-
7 files changed, 12 insertions(+), 7 deletions(-)
diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
index 39f9d5a..4705b50 100644
--- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
+++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
@@ -165,7 +165,7 @@ int omap2_select_table_rate(struct clk *clk, unsigned long
rate)
return 0;
}
-#ifdef CONFIG_CPU_FREQ
+#ifdef CONFIG_ARM_OMAP2PLUS_CPUFREQ
/*
* Walk PRCM rate table and fillout cpufreq freq_table
* XXX This should be replaced by an OPP layer in the near future
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index f57ed5b..450feb0 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -536,7 +536,7 @@ struct clk_functions omap2_clk_functions = {
.clk_set_rate = omap2_clk_set_rate,
.clk_set_parent = omap2_clk_set_parent,
.clk_disable_unused = omap2_clk_disable_unused,
-#ifdef CONFIG_CPU_FREQ
+#ifdef CONFIG_ARM_OMAP2PLUS_CPUFREQ
/* These will be removed when the OPP code is integrated */
.clk_init_cpufreq_table = omap2_clk_init_cpufreq_table,
.clk_exit_cpufreq_table = omap2_clk_exit_cpufreq_table,
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index b8c2a68..f331cfc 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -146,7 +146,7 @@ extern const struct clksel_rate gpt_sys_rates[];
extern const struct clksel_rate gfx_l3_rates[];
extern const struct clksel_rate dsp_ick_rates[];
-#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_CPU_FREQ)
+#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_ARM_OMAP2PLUS_CPUFREQ)
extern void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table
**table);
extern void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table
**table);
#else
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 567e4b5..2e2efb6 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -399,7 +399,7 @@ struct clk dummy_ck = {
.ops = &clkops_null,
};
-#ifdef CONFIG_CPU_FREQ
+#ifdef CONFIG_ARM_OMAP2PLUS_CPUFREQ
void clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
{
unsigned long flags;
diff --git a/arch/arm/plat-omap/include/plat/clock.h
b/arch/arm/plat-omap/include/plat/clock.h
index 240a7b9..879ba27 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -283,7 +283,7 @@ struct clk_functions {
void (*clk_allow_idle)(struct clk *clk);
void (*clk_deny_idle)(struct clk *clk);
void (*clk_disable_unused)(struct clk *clk);
-#ifdef CONFIG_CPU_FREQ
+#ifdef CONFIG_ARM_OMAP2PLUS_CPUFREQ
void (*clk_init_cpufreq_table)(struct
cpufreq_frequency_table **);
void (*clk_exit_cpufreq_table)(struct
cpufreq_frequency_table **);
#endif
@@ -301,7 +301,7 @@ extern void recalculate_root_clocks(void);
extern unsigned long followparent_recalc(struct clk *clk);
extern void clk_enable_init_clocks(void);
unsigned long omap_fixed_divisor_recalc(struct clk *clk);
-#ifdef CONFIG_CPU_FREQ
+#ifdef CONFIG_ARM_OMAP2PLUS_CPUFREQ
extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table);
extern void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table);
#endif
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index c8bde43..74e8b55 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -2,6 +2,11 @@
# ARM CPU Frequency scaling drivers
#
+config ARM_OMAP2PLUS_CPUFREQ
+ bool
+ depends on ARCH_OMAP2PLUS
+ select CPU_FREQ_TABLE
+
config ARM_S3C64XX_CPUFREQ
bool "Samsung S3C64XX"
depends on CPU_S3C6410
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index ac000fa..fda94c7 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -44,7 +44,7 @@ obj-$(CONFIG_ARM_S3C64XX_CPUFREQ) += s3c64xx-cpufreq.o
obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS_CPUFREQ) += exynos-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ) += exynos4210-cpufreq.o
-obj-$(CONFIG_ARCH_OMAP2PLUS) += omap-cpufreq.o
+obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o
##################################################################################
# PowerPC platform drivers
--
1.7.4.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
