On Tue, Mar 20, 2012 at 9:25 PM, Felipe Balbi <ba...@ti.com> wrote: > On Tue, Mar 20, 2012 at 04:53:53PM +0100, Samuel Ortiz wrote: >> Hi Keshava, >> >> On Mon, Mar 19, 2012 at 12:12:47PM +0530, Keshava Munegowda wrote: >> > From: Keshava Munegowda <keshava_mgo...@ti.com> >> > >> > It is observed that the echi ports of 3430 sdp board >> > are not working due to the random timing of programming >> > the associated GPIOs of the ULPI PHYs of the EHCI for reset. >> > If the PHYs are reset at during usbhs core driver, host ports will >> > not work because EHCI driver is loaded after the resetting PHYs. >> > The PHYs should be in reset state while initializing the EHCI >> > controller. >> > The code which does the GPIO pins associated with the PHYs >> > are programmed to reset is moved from the USB host core driver >> > to EHCI driver. >> > >> > Signed-off-by: Keshava Munegowda <keshava_mgo...@ti.com> >> > Reviewed-by: Partha Basak <part...@india.ti.com> >> Felipe, are you ok with that patch ? >> I'll most likely queue it after this merge window is closed though. > > my bad, here's my Ack: > > Acked-by: Felipe Balbi <ba...@ti.com> > > -- > balbi
thanks , Felipe regards keshava -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
