[PATCH 09/13] Add dummy smsc911x regulators to omap3evm.

[Russ Dill]

Signed-off-by: Russ Dill <russ.d...@ti.com>
---
 arch/arm/mach-omap2/board-omap3evm.c |   15 ++++++---------
 1 files changed, 6 insertions(+), 9 deletions(-)

diff --git a/arch/arm/mach-omap2/board-omap3evm.c 
b/arch/arm/mach-omap2/board-omap3evm.c
index a659e19..6a5e57c 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -114,15 +114,6 @@ static struct omap_smsc911x_platform_data smsc911x_cfg = {
 
 static inline void __init omap3evm_init_smsc911x(void)
 {
-       struct clk *l3ck;
-       unsigned int rate;
-
-       l3ck = clk_get(NULL, "l3_ck");
-       if (IS_ERR(l3ck))
-               rate = 100000000;
-       else
-               rate = clk_get_rate(l3ck);
-
        /* Configure ethernet controller reset gpio */
        if (cpu_is_omap3430()) {
                if (get_omap3_evm_rev() == OMAP3EVM_BOARD_GEN_1)
@@ -632,9 +623,15 @@ static void __init omap3_evm_wl12xx_init(void)
 #endif
 }
 
+static struct regulator_consumer_supply dummy_supplies[] = {
+       REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+       REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
 static void __init omap3_evm_init(void)
 {
        omap3_evm_get_revision();
+       regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 
        if (cpu_is_omap3630())
                omap3_mux_init(omap36x_board_mux, OMAP_PACKAGE_CBB);
-- 
1.7.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html