On Tue, 13 Mar 2012, Rajendra Nayak wrote:

> After a softreset, make sure the sysc settings are correctly
> restored.
> 
> Reported-by: Anand Gadiyar <[email protected]>
> Signed-off-by: Rajendra Nayak <[email protected]>
> Cc: Benoit Cousson <[email protected]>
> Cc: Paul Walmsley <[email protected]>
> Cc: Shubhrajyoti D <[email protected]>

Thanks, this patch has been modified a bit to consolidate the SYSCONFIG 
reload after _reset() into the _reset() function itself.  This should 
hopefully avoid future mistakes and avoid some code duplication.  Modified 
patch follows, queued for 3.4-rc.


- Paul


From: Rajendra Nayak <[email protected]>
Date: Tue, 13 Mar 2012 22:55:23 +0530
Subject: [PATCH] ARM: OMAP2+: hwmod: Restore sysc after a reset

After a softreset, make sure the sysc settings are correctly
restored.

Reported-by: Anand Gadiyar <[email protected]>
Signed-off-by: Rajendra Nayak <[email protected]>
Cc: Benoit Cousson <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Shubhrajyoti D <[email protected]>
[[email protected]: combined post-reset SYSCONFIG reload code into the
 _reset() function to avoid duplication and future mistakes]
Signed-off-by: Paul Walmsley <[email protected]>
---
 arch/arm/mach-omap2/omap_hwmod.c |   18 ++++++------------
 1 file changed, 6 insertions(+), 12 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 5a68010..d32c1ce 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1477,6 +1477,11 @@ static int _reset(struct omap_hwmod *oh)
 
        ret = (oh->class->reset) ? oh->class->reset(oh) : _ocp_softreset(oh);
 
+       if (oh->class->sysc) {
+               _update_sysc_cache(oh);
+               _enable_sysc(oh);
+       }
+
        return ret;
 }
 
@@ -1786,20 +1791,9 @@ static int _setup(struct omap_hwmod *oh, void *data)
                return 0;
        }
 
-       if (!(oh->flags & HWMOD_INIT_NO_RESET)) {
+       if (!(oh->flags & HWMOD_INIT_NO_RESET))
                _reset(oh);
 
-               /*
-                * OCP_SYSCONFIG bits need to be reprogrammed after a softreset.
-                * The _enable() function should be split to
-                * avoid the rewrite of the OCP_SYSCONFIG register.
-                */
-               if (oh->class->sysc) {
-                       _update_sysc_cache(oh);
-                       _enable_sysc(oh);
-               }
-       }
-
        postsetup_state = oh->_postsetup_state;
        if (postsetup_state == _HWMOD_STATE_UNKNOWN)
                postsetup_state = _HWMOD_STATE_ENABLED;
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to