Move the OMAP1 OCPI "bus" code to arch/arm/mach-omap1, since it is only used on OMAP1 devices. In the long term, it probably makes sense to move the OCPI bus code to somewhere under drivers/.
Signed-off-by: Paul Walmsley <[email protected]> Cc: Tony Lindgren <[email protected]> --- arch/arm/mach-omap1/Makefile | 3 +++ arch/arm/mach-omap1/common.h | 2 ++ arch/arm/mach-omap1/ocpi.c | 7 +++++-- arch/arm/plat-omap/Makefile | 3 --- 4 files changed, 10 insertions(+), 5 deletions(-) rename arch/arm/{plat-omap/ocpi.c => mach-omap1/ocpi.c} (93%) diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 9923f92..20d65af 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -12,6 +12,9 @@ endif obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o +# OCPI interconnect support for 1710, 1610 and 5912 +obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o + # Power Management obj-$(CONFIG_PM) += pm.o sleep.o diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h index ef656ff..a90b9d7 100644 --- a/arch/arm/mach-omap1/common.h +++ b/arch/arm/mach-omap1/common.h @@ -63,4 +63,6 @@ extern bool omap_32k_timer_init(void); extern u32 omap_irq_flags; +extern int ocpi_enable(void); + #endif /* __ARCH_ARM_MACH_OMAP1_COMMON_H */ diff --git a/arch/arm/plat-omap/ocpi.c b/arch/arm/mach-omap1/ocpi.c similarity index 93% rename from arch/arm/plat-omap/ocpi.c rename to arch/arm/mach-omap1/ocpi.c index ebe0c73..238170c 100644 --- a/arch/arm/plat-omap/ocpi.c +++ b/arch/arm/mach-omap1/ocpi.c @@ -4,6 +4,7 @@ * Minimal OCP bus support for omap16xx * * Copyright (C) 2003 - 2005 Nokia Corporation + * Copyright (C) 2012 Texas Instruments, Inc. * Written by Tony Lindgren <[email protected]> * * Modified for clock framework by Paul Mundt <[email protected]>. @@ -35,6 +36,8 @@ #include <mach/hardware.h> +#include "common.h" + #define OCPI_BASE 0xfffec320 #define OCPI_FAULT (OCPI_BASE + 0x00) #define OCPI_CMD_FAULT (OCPI_BASE + 0x04) @@ -64,7 +67,7 @@ int ocpi_enable(void) /* Enable access for OHCI in OCPI */ val = omap_readl(OCPI_PROT); val &= ~0xff; - //val &= (1 << 0); /* Allow access only to EMIFS */ + /* val &= (1 << 0); Allow access only to EMIFS */ omap_writel(val, OCPI_PROT); val = omap_readl(OCPI_SEC); @@ -86,7 +89,7 @@ static int __init omap_ocpi_init(void) clk_enable(ocpi_ck); ocpi_enable(); - printk("OMAP OCPI interconnect driver loaded\n"); + pr_info("OMAP OCPI interconnect driver loaded\n"); return 0; } diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index c0fe275..ed8605f 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -9,9 +9,6 @@ obj-m := obj-n := obj- := -# OCPI interconnect support for 1710, 1610 and 5912 -obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o - # omap_device support (OMAP2+ only at the moment) obj-$(CONFIG_ARCH_OMAP2) += omap_device.o obj-$(CONFIG_ARCH_OMAP3) += omap_device.o -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
