From: Santosh Shilimkar <[email protected]>

Work around for Errata ID: i632 "LPDDR2 Corruption After OFF Mode
Transition When CS1 Is Used On EMIF" which impacts OMAP443x silicon
The issue occurs when EMIF_SDRAM_CONFIG is restored first before
EMIF_SDRAM_CONFIG_2 is not yet restored, the register configuration
is not set properly, we apply the required workaround allowing
the restore sequence to work properly.

Signed-off-by: Santosh Shilimkar <[email protected]>
[[email protected]: moved workaround from omap-sar.c to pm44xx.c]
Signed-off-by: Tero Kristo <[email protected]>
---
 .../include/mach/ctrl_module_wkup_44xx.h           |    2 +
 arch/arm/mach-omap2/pm44xx.c                       |   24 ++++++++++++++++++++
 2 files changed, 26 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/include/mach/ctrl_module_wkup_44xx.h 
b/arch/arm/mach-omap2/include/mach/ctrl_module_wkup_44xx.h
index a0af9ba..b763a79 100644
--- a/arch/arm/mach-omap2/include/mach/ctrl_module_wkup_44xx.h
+++ b/arch/arm/mach-omap2/include/mach/ctrl_module_wkup_44xx.h
@@ -28,6 +28,8 @@
 #define OMAP4_CTRL_MODULE_WKUP_IP_REVISION             0x0000
 #define OMAP4_CTRL_MODULE_WKUP_IP_HWINFO               0x0004
 #define OMAP4_CTRL_MODULE_WKUP_IP_SYSCONFIG            0x0010
+#define OMAP4_CTRL_SECURE_EMIF1_SDRAM_CONFIG2_REG      0x0114
+#define OMAP4_CTRL_SECURE_EMIF2_SDRAM_CONFIG2_REG      0x011c
 #define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_0    0x0460
 #define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_1    0x0464
 #define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_2    0x0468
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index 0472921..d4d18d9 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -17,6 +17,9 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <asm/system_misc.h>
+#include <linux/io.h>
+
+#include <mach/ctrl_module_wkup_44xx.h>
 
 #include "common.h"
 #include "clockdomain.h"
@@ -215,6 +218,27 @@ static int __init omap4_pm_init(void)
 
        pr_err("Power Management for TI OMAP4.\n");
 
+       /*
+        * Work around for OMAP443x Errata i632: "LPDDR2 Corruption After OFF
+        * Mode Transition When CS1 Is Used On EMIF":
+        * Overwrite EMIF1/EMIF2
+        * SECURE_EMIF1_SDRAM_CONFIG2_REG
+        * SECURE_EMIF2_SDRAM_CONFIG2_REG
+        */
+       if (cpu_is_omap443x()) {
+               void __iomem *secure_ctrl_mod;
+
+               secure_ctrl_mod = ioremap(OMAP4_CTRL_MODULE_WKUP, SZ_4K);
+               BUG_ON(!secure_ctrl_mod);
+
+               __raw_writel(0x10, secure_ctrl_mod +
+                            OMAP4_CTRL_SECURE_EMIF1_SDRAM_CONFIG2_REG);
+               __raw_writel(0x10, secure_ctrl_mod +
+                            OMAP4_CTRL_SECURE_EMIF2_SDRAM_CONFIG2_REG);
+               wmb();
+               iounmap(secure_ctrl_mod);
+       }
+
        ret = pwrdm_for_each(pwrdms_setup, NULL);
        if (ret) {
                pr_err("Failed to setup powerdomains\n");
-- 
1.7.4.1

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to