The supply is connected to the DSS DO-D5 pins and is thus needed for both serial and parallel display interfaces on the igep0030 as well as the igep0020.
If the igep0030 module isn't connected to a display, no DSI or DPI display will be specified in board code, and the DSS driver won't enable to VPLL2 regulator anyway. Signed-off-by: Laurent Pinchart <[email protected]> --- arch/arm/mach-omap2/board-igep0020.c | 10 +++++----- 1 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index a59ace0..242cdff 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -539,7 +539,10 @@ static void __init igep_i2c_init(void) { int ret; - omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_USB, 0); + omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_USB, + TWL_COMMON_REGULATOR_VPLL2); + igep_twldata.vpll2->constraints.apply_uV = true; + igep_twldata.vpll2->constraints.name = "VDVI"; if (machine_is_igep0020()) { /* @@ -553,10 +556,7 @@ static void __init igep_i2c_init(void) igep_twldata.keypad = &igep2_keypad_pdata; /* Get common pmic data */ - omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_AUDIO, - TWL_COMMON_REGULATOR_VPLL2); - igep_twldata.vpll2->constraints.apply_uV = true; - igep_twldata.vpll2->constraints.name = "VDVI"; + omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_AUDIO, 0); } omap3_pmic_init("twl4030", &igep_twldata); -- Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
