Hi, On Fri, May 04, 2012 at 04:24:47AM -0700, Russ Dill wrote: > 'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue' (1fcb57d0f) created a > regression > with Beagleboard xM if booting the kernel after running 'usb start' under > u-boot. > > Finishing the reset before calling 'usb_add_hcd' fixes the regression. This > is most likely due to > usb_add_hcd calling the driver's reset and init functions which expect the > hardware to be > up and running. > > Signed-off-by: Russ Dill <russ.d...@ti.com>
looks correct to me:
Acked-by: Felipe Balbi <ba...@ti.com>
> ---
> drivers/usb/host/ehci-omap.c | 18 +++++++++---------
> 1 file changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
> index 5c78f9e..e669c6a 100644
> --- a/drivers/usb/host/ehci-omap.c
> +++ b/drivers/usb/host/ehci-omap.c
> @@ -242,15 +242,6 @@ static int ehci_hcd_omap_probe(struct platform_device
> *pdev)
>
> ehci_reset(omap_ehci);
>
> - ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
> - if (ret) {
> - dev_err(dev, "failed to add hcd with err %d\n", ret);
> - goto err_add_hcd;
> - }
> -
> - /* root ports should always stay powered */
> - ehci_port_power(omap_ehci, 1);
> -
> if (pdata->phy_reset) {
> /* Hold the PHY in RESET for enough time till
> * PHY is settled and ready
> @@ -264,6 +255,15 @@ static int ehci_hcd_omap_probe(struct platform_device
> *pdev)
> gpio_set_value(pdata->reset_gpio_port[1], 1);
> }
>
> + ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
> + if (ret) {
> + dev_err(dev, "failed to add hcd with err %d\n", ret);
> + goto err_add_hcd;
> + }
> +
> + /* root ports should always stay powered */
> + ehci_port_power(omap_ehci, 1);
> +
> return 0;
>
> err_add_hcd:
> --
> 1.7.9.5
>
--
balbi
signature.asc
Description: Digital signature
