* Kevin Hilman <[email protected]> [120504 09:31]: > Hi Thomas, > > Thomas Petazzoni <[email protected]> writes: > > > I have an IGEPv2 revision 6 board, which uses the DM3730 OMAP3. With > > 3.2 omap2plus_defconfig, the system boots fine and have a working shell > > on ttyO2. On either 3.3, 3.4-rc5 or arm-soc/for-next from Arnd, the > > system boots all the way up to showing the shell prompt, but I can't > > type any character, as if UART RX was broken. > > On v3.4-rc, can you see if reverting bce492c04ba8fc66a4ea0a52b181ba255daaaf54 > has any effect? > > That patch had some unfortunate side effects, but I haven't seen the > problem you see, so I'm not sure if it's related.
Reverting bce492c04ba8fc66a4ea0a52b181ba255daaaf54 is a broken solution like you mentioned. But if it helps, then the proper fix is to add muxing to board-*.c files for the uart pins and use omap_serial_init_port for each uart instead of omap_serial_init. That should fix the wake-up issues too. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
