Each irq_chip for the main interrupt controller has offsets set for irq masking registers, which added to respective base results in a pointer to appropriate hardware register. However this is not correct for INTC_CONTROL as there is only one INTC_CONTROL register. This does not cause problems because generic ack code is never called, but remove this assignment to avoid confusion.
Signed-off-by: Grazvydas Ignotas <[email protected]> --- arch/arm/mach-omap2/irq.c | 1 - 1 files changed, 0 insertions(+), 1 deletions(-) diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 65f0d25..c11e8a8 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -149,7 +149,6 @@ omap_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num) ct->chip.irq_mask = irq_gc_mask_disable_reg; ct->chip.irq_unmask = irq_gc_unmask_enable_reg; - ct->regs.ack = INTC_CONTROL; ct->regs.enable = INTC_MIR_CLEAR0; ct->regs.disable = INTC_MIR_SET0; irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE, -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
