Add the Kconfig/Makefile stuff for the palmas regulator driver
Signed-off-by: Graeme Gregory <[email protected]>
---
drivers/regulator/Kconfig | 12 ++++++++++++
drivers/regulator/Makefile | 1 +
2 files changed, 13 insertions(+)
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 4ad4e8d..c86b886 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -268,6 +268,18 @@ config REGULATOR_DB8500_PRCMU
This driver supports the voltage domain regulators controlled by the
DB8500 PRCMU
+config REGULATOR_PALMAS
+ tristate "TI Palmas PMIC Regulators"
+ depends on MFD_PALMAS
+ help
+ If you wish to control the regulators on the Palmas series of
+ chips say Y here. This will enable support for all the software
+ controllable SMPS/LDO regulators.
+
+ The regulators available on Palmas series chips vary depending
+ on the muxing. This is handled automatically in the driver by
+ reading the mux info from OTP.
+
config REGULATOR_TPS6105X
tristate "TI TPS6105X Power regulators"
depends on TPS6105X
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index dcc56dc..977fd46 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -33,6 +33,7 @@ obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o
obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
+obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
obj-$(CONFIG_REGULATOR_RC5T583) += rc5t583-regulator.o
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
