On 5/28/2012 12:26 PM, Valentin, Eduardo wrote:
Hello Santosh,

On Mon, May 28, 2012 at 12:48 PM, Felipe Balbi<ba...@ti.com>  wrote:
Hi,

On Mon, May 28, 2012 at 03:03:26PM +0530, Shilimkar, Santosh wrote:
On Fri, May 25, 2012 at 1:56 PM, Eduardo Valentin
<eduardo.valen...@ti.com>  wrote:
This patch exposes OMAP4 thermal sensor as a thermal zone
named "cpu". Only thermal creation is done here.

TODO:

  - Add cooling bindings
  - Add extrapolation rules

Signed-off-by: Eduardo Valentin<eduardo.valen...@ti.com>
---
  drivers/thermal/Kconfig         |   12 ++++++
  drivers/thermal/Makefile        |    1 +
  drivers/thermal/omap-bandgap.c  |    1 +
  drivers/thermal/omap-bandgap.h  |   12 ++++++
  drivers/thermal/omap4-thermal.c |   72 +++++++++++++++++++++++++++++++++++++++
  5 files changed, 98 insertions(+), 0 deletions(-)
  create mode 100644 drivers/thermal/omap4-thermal.c

diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index ffdd240..2e82797 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -39,3 +39,15 @@ config OMAP_BANDGAP
          This includes alert interrupts generation and also the TSHUT
          support.

+config OMAP4_THERMAL
+       bool "Texas Instruments OMAP4 thermal support"
+       depends on OMAP_BANDGAP
+       depends on ARCH_OMAP4
+       help
+         If you say yes here you get thermal support for the Texas Instruments
+         OMAP4 SoC family. The current chip supported are:
+          - OMAP4460
+
It's more of IP feature than OMAP specific, so something like

config  HAVE_BANDGAP_THERMAL_SUPPORT

and then let processor's which support enable it. That OMAP varients
in AMXX etc if needed can make use of it.

Those are just an OMAP in disguise.

If you agree, then rest of the driver also can be cleaned to avoid
omap_* in file names and variables.

Apart from this minor comment, rest of the patch looks fine to me.

Then it will appear as a fully generic bandgap driver, which is not the
case. This is really a TI thing, right ?

I have to agree with Felipe here. I do see your point to have a name
which is applicable to AMxx, but having such generic naming is not
helping either :-( as this bandgap driver is not supposed to be
generic.

I though of "ti_bandgap.*", but still seams to be misleading..

Yeah, I guess omap_bandgap is good enough. This issues is mainly due to the version in OMAP4 for my point of view.

Benoit
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to