On Mon, Jun 18, 2012 at 2:42 PM, Brian Austin <[email protected]> wrote: > The beagleboard USB Host Port that is used is Port 2. The platform driver > sets MODE_PHY for port 1 causing pin muxing to override the pins on the > expansion > connector P17 when using board_mux[]. Since USBHS Port 1 is not connected > remove the case for muxing the USB Port1 pins by default. > > Patch is based off of 3.5-rc2 from ASoC for-next branch > > Tested with BeagleBoard xM revC and checked the userguides for Beagle xM and > revC to be sure USB Port2 is what is used. > > Singed-off-by: Brian Austin <[email protected]>
You'll probably have to fix your sing/sign typo, but otherwise it looks good Acked-by: Russ Dill <[email protected]> Just for those that might get confused looking at schematics, port_mode[0] refers to the HSUSB1_* pins, and port_mode[1] refers to the HSUSB2_* pins. > --- > arch/arm/mach-omap2/board-omap3beagle.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm/mach-omap2/board-omap3beagle.c > b/arch/arm/mach-omap2/board-omap3beagle.c > index 79c6909..75eb88a 100644 > --- a/arch/arm/mach-omap2/board-omap3beagle.c > +++ b/arch/arm/mach-omap2/board-omap3beagle.c > @@ -435,7 +435,7 @@ static struct platform_device *omap3_beagle_devices[] > __initdata = { > > static const struct usbhs_omap_board_data usbhs_bdata __initconst = { > > - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, > + .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, > .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, > .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, > > -- > 1.7.10.4 > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to [email protected] > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
