* Brian Austin <brian.aus...@cirrus.com> [120619 07:29]:
> The beagleboard USB Host Port that is used is Port 2. The platform driver
> sets MODE_PHY for port 1 causing pin muxing to override the pins on the
> expansion
> connector P17 when using board_mux[]. Since USBHS Port 1 is not connected
> remove the case for muxing the USB Port1 pins by default.
>
> Patch is based off of 3.5-rc2 from ASoC for-next branch
>
> Tested with BeagleBoard xM revC and checked the userguides for Beagle xM and
> revC to be sure USB Port2 is what is used.
Thanks applying into fixes.
Tony
>
> Signed-off-by: Brian Austin <brian.aus...@cirrus.com>
> ---
> arch/arm/mach-omap2/board-omap3beagle.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/mach-omap2/board-omap3beagle.c
> b/arch/arm/mach-omap2/board-omap3beagle.c
> index 79c6909..75eb88a 100644
> --- a/arch/arm/mach-omap2/board-omap3beagle.c
> +++ b/arch/arm/mach-omap2/board-omap3beagle.c
> @@ -435,7 +435,7 @@ static struct platform_device *omap3_beagle_devices[]
> __initdata = {
>
> static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
>
> - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
> + .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
> .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
> .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
>
> --
> 1.7.10.4
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
