* Afzal Mohammed <af...@ti.com> [120626 23:53]: > Reorganize gpmc-onenand initialization so that changes > required for gpmc driver migration can be made smooth. > > Ensuring sync read/write are disabled in onenand cannot > be expected to work properly unless GPMC is setup, this > has been removed. > > Refactor set_async_mode & set_sync_mode functions to > separate out timing calculation & actual configuration > (GPMC & OneNAND side).
The last patch in this series causes onenand not to show up on my n900. I believe the problem has been there earlier too, but I just did not notice it. Without the last patch in this series I get: [ 1.650207] OneNAND driver initializing [ 1.655487] omap2-onenand omap2-onenand: initializing on CS0, phys base 0x04000000, virtual base d0880000, freq 83 MHz [ 1.666931] OneNAND Manufacturer: Numonyx (0x20) [ 1.671905] Muxed OneNAND 256MB 1.8V 16-bit (0x40) [ 1.676971] OneNAND version = 0x0031 [ 1.918762] Creating 6 MTD partitions on "omap2-onenand": And with this patch applied I get: [ 1.634643] OneNAND driver initializing [ 1.640075] omap2-onenand omap2-onenand: initializing on CS0, phys base 0x04000000, virtual base d0880000, freq 54 MHz [ 1.651519] OneNAND Manufacturer: Unknown (0xa0) Any ideas? Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
