On Wed, 2012-06-27 at 19:34 +0530, [email protected] wrote:
> From: Jassi Brar <[email protected]>
> 
> State change of HDMI PHY could potentially take many millisecs, we can do
> better by protecting things in hdmi_set_phy_pwr() with a mutex rather than
> a spin_lock_irqsave.
> 
> Signed-off-by: Jassi Brar <[email protected]>
> ---
>  drivers/video/omap2/dss/hdmi.c            |    1 +
>  drivers/video/omap2/dss/ti_hdmi.h         |    1 +
>  drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c |    6 ++----
>  3 files changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
> index 8195c71..0738090 100644
> --- a/drivers/video/omap2/dss/hdmi.c
> +++ b/drivers/video/omap2/dss/hdmi.c
> @@ -758,6 +758,7 @@ static int __init omapdss_hdmihw_probe(struct 
> platform_device *pdev)
>       hdmi.ip_data.core_av_offset = HDMI_CORE_AV;
>       hdmi.ip_data.pll_offset = HDMI_PLLCTRL;
>       hdmi.ip_data.phy_offset = HDMI_PHY;
> +     mutex_init(&hdmi.ip_data.lock);
>  
>       hdmi_panel_init();
>  
> diff --git a/drivers/video/omap2/dss/ti_hdmi.h 
> b/drivers/video/omap2/dss/ti_hdmi.h
> index d174ca1..cc292b8 100644
> --- a/drivers/video/omap2/dss/ti_hdmi.h
> +++ b/drivers/video/omap2/dss/ti_hdmi.h
> @@ -177,6 +177,7 @@ struct hdmi_ip_data {
>  
>       /* ti_hdmi_4xxx_ip private data. These should be in a separate struct */
>       int hpd_gpio;
> +     struct mutex lock;
>  };
>  int ti_hdmi_4xxx_phy_enable(struct hdmi_ip_data *ip_data);
>  void ti_hdmi_4xxx_phy_disable(struct hdmi_ip_data *ip_data);
> diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c 
> b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
> index 3fa3d98..04acca9 100644
> --- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
> +++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
> @@ -238,10 +238,8 @@ static int hdmi_check_hpd_state(struct hdmi_ip_data 
> *ip_data)
>       unsigned long flags;
>       bool hpd;
>       int r;
> -     /* this should be in ti_hdmi_4xxx_ip private data */
> -     static DEFINE_SPINLOCK(phy_tx_lock);
>  
> -     spin_lock_irqsave(&phy_tx_lock, flags);
> +     mutex_lock(&ip_data->lock);
>  
>       hpd = gpio_get_value(ip_data->hpd_gpio);
>  
> @@ -257,7 +255,7 @@ static int hdmi_check_hpd_state(struct hdmi_ip_data 
> *ip_data)
>       }
>  
>  err:
> -     spin_unlock_irqrestore(&phy_tx_lock, flags);
> +     mutex_unlock(&ip_data->lock);
>       return r;

This introduced a new warning:

drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c: In function 'hdmi_check_hpd_state':
drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c:238:16: warning: unused variable 
'flags'

I fixed that.

I'll apply this and the first patch, as I don't think there are any
questions about these.

 Tomi

Attachment: signature.asc
Description: This is a digitally signed message part

Reply via email to