+ Benoît who is the maintainer of this file + the linux-arm-kernel mailing list, which should be cc'ed on all OMAP patches
On Fri, 29 Jun 2012, Ruslan Bilovol wrote: > From: Wenbiao Wang <[email protected]> > > OTG clock usb_otg_hs_ick used a incorrect parent l3_div_ck. > Correct it to use the right colck otg_60m_gfclk as its > parent. > > Signed-off-by: Wenbiao Wang <[email protected]> > Signed-off-by: Ruslan Bilovol <[email protected]> > --- > arch/arm/mach-omap2/clock44xx_data.c | 15 ++++++++------- > 1 files changed, 8 insertions(+), 7 deletions(-) > > diff --git a/arch/arm/mach-omap2/clock44xx_data.c > b/arch/arm/mach-omap2/clock44xx_data.c > index b825049..fd43214 100644 > --- a/arch/arm/mach-omap2/clock44xx_data.c > +++ b/arch/arm/mach-omap2/clock44xx_data.c > @@ -199,12 +199,6 @@ static struct clk tie_low_clock_ck = { > .ops = &clkops_null, > }; > > -static struct clk utmi_phy_clkout_ck = { > - .name = "utmi_phy_clkout_ck", > - .rate = 60000000, > - .ops = &clkops_null, > -}; > - > static struct clk xclk60mhsp1_ck = { > .name = "xclk60mhsp1_ck", > .rate = 60000000, > @@ -992,6 +986,13 @@ static struct clk dpll_usb_clkdcoldo_ck = { > .recalc = &followparent_recalc, > }; > > +static struct clk utmi_phy_clkout_ck = { > + .name = "utmi_phy_clkout_ck", > + .ops = &clkops_null, > + .parent = &dpll_usb_clkdcoldo_ck, > + .recalc = &followparent_recalc, > +}; > + > static const struct clksel dpll_usb_m2_div[] = { > { .parent = &dpll_usb_ck, .rates = div31_1to31_rates }, > { .parent = NULL }, > @@ -2685,7 +2686,7 @@ static struct clk usb_otg_hs_ick = { > .enable_reg = OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL, > .enable_bit = OMAP4430_MODULEMODE_HWCTRL, > .clkdm_name = "l3_init_clkdm", > - .parent = &l3_div_ck, > + .parent = &otg_60m_gfclk, > .recalc = &followparent_recalc, > }; Benoît should have a look at this one, I think. - Paul
