Fixing the cpsw device tree example to make it simpler to copy pastable to dts file and use it directly.
Signed-off-by: Mugunthan V N <[email protected]> --- Documentation/devicetree/bindings/net/cpsw.txt | 101 ++++++++++++----------- 1 files changed, 53 insertions(+), 48 deletions(-) diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt index acca48c..dcaabe9 100644 --- a/Documentation/devicetree/bindings/net/cpsw.txt +++ b/Documentation/devicetree/bindings/net/cpsw.txt @@ -11,6 +11,7 @@ Required properties: - cpdma_channels : Specifies number of channels in CPDMA - host_port_no : Specifies host port shift - cpdma_reg_ofs : Specifies CPDMA submodule register offset +- cpdma_sram_ofs : Specifies CPDMA SRAM offset - ale_reg_ofs : Specifies ALE submodule register offset - ale_entries : Specifies No of entries ALE can hold - host_port_reg_ofs : Specifies host port register offset @@ -43,62 +44,66 @@ Examples: reg = <0x4A100000 0x1000>; interrupts = <55 0x4>; interrupt-parent = <&intc>; - cpdma_channels = 8; - host_port_no = 0; - cpdma_reg_ofs = 0x800; - ale_reg_ofs = 0xd00; - ale_entries = 1024; - host_port_reg_ofs = 0x108; - hw_stats_reg_ofs = 0x900; - bd_ram_ofs = 0x2000; - bd_ram_size = 0x2000; - no_bd_ram = 0; - rx_descs = 64; - mac_control = 0x20; - slaves = 2; - slave@0 { - slave_reg_ofs = 0x208; - sliver_reg_ofs = 0xd80; - phy_id = "davinci_mdio-0:00" - mac-address = [00 04 9F 01 1B B8]; + cpdma_channels = <8>; + host_port_no = <0>; + cpdma_reg_ofs = <0x800>; + cpdma_sram_ofs = <0xa00>; + ale_reg_ofs = <0xd00>; + ale_entries = <1024>; + host_port_reg_ofs = <0x108>; + hw_stats_reg_ofs = <0x900>; + bd_ram_ofs = <0x2000>; + bd_ram_size = <0x2000>; + no_bd_ram = <0>; + rx_descs = <64>; + mac_control = <0x20>; + slaves = <2>; + cpsw_emac0: slave@0 { + slave_reg_ofs = <0x208>; + sliver_reg_ofs = <0xd80>; + phy_id = "davinci_mdio.16:00"; + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; }; - slave@1 { - slave_reg_ofs = 0x208; - sliver_reg_ofs = 0xd80; - phy_id = "davinci_mdio-0:01" - mac-address = [00 04 9F 01 1B B9]; + cpsw_emac1: slave@1 { + slave_reg_ofs = <0x308>; + sliver_reg_ofs = <0xdc0>; + phy_id = "davinci_mdio.16:01"; + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; }; }; (or) - mac: ethernet@4A100000 { compatible = "ti,cpsw"; ti,hwmods = "cpgmac0"; - cpdma_channels = 8; - host_port_no = 0; - cpdma_reg_ofs = 0x800; - ale_reg_ofs = 0xd00; - ale_entries = 1024; - host_port_reg_ofs = 0x108; - hw_stats_reg_ofs = 0x900; - bd_ram_ofs = 0x2000; - bd_ram_size = 0x2000; - no_bd_ram = 0; - rx_descs = 64; - mac_control = 0x20; - slaves = 2; - slave@0 { - slave_reg_ofs = 0x208; - sliver_reg_ofs = 0xd80; - phy_id = "davinci_mdio-0:00" - mac-address = [00 04 9F 01 1B B8]; + cpdma_channels = <8>; + host_port_no = <0>; + cpdma_reg_ofs = <0x800>; + cpdma_sram_ofs = <0xa00>; + ale_reg_ofs = <0xd00>; + ale_entries = <1024>; + host_port_reg_ofs = <0x108>; + hw_stats_reg_ofs = <0x900>; + bd_ram_ofs = <0x2000>; + bd_ram_size = <0x2000>; + no_bd_ram = <0>; + rx_descs = <64>; + mac_control = <0x20>; + slaves = <2>; + cpsw_emac0: slave@0 { + slave_reg_ofs = <0x208>; + sliver_reg_ofs = <0xd80>; + phy_id = "davinci_mdio.16:00"; + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; }; - slave@1 { - slave_reg_ofs = 0x208; - sliver_reg_ofs = 0xd80; - phy_id = "davinci_mdio-0:01" - mac-address = [00 04 9F 01 1B B9]; + cpsw_emac1: slave@1 { + slave_reg_ofs = <0x308>; + sliver_reg_ofs = <0xdc0>; + phy_id = "davinci_mdio.16:01"; + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; }; - }; -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
