On Mon, Aug 13, 2012 at 7:39 PM, Felipe Balbi <[email protected]> wrote:
> On Mon, Aug 13, 2012 at 06:52:13PM +0530, Munegowda, Keshava wrote:
>> On Fri, Jul 27, 2012 at 5:44 PM, Munegowda, Keshava
>> <[email protected]> wrote:
>> > On Mon, Jul 23, 2012 at 8:04 PM, Munegowda, Keshava
>> > <[email protected]> wrote:
>> >> On Mon, Jul 23, 2012 at 7:38 PM, Felipe Balbi <[email protected]> wrote:
>> >>> Hi,
>> >>>
>> >>> On Mon, Jul 23, 2012 at 07:31:10PM +0530, Munegowda, Keshava wrote:
>> >>>> On Thu, Jul 19, 2012 at 3:48 PM, Munegowda, Keshava
>> >>>> <[email protected]> wrote:
>> >>>> > On Mon, Jul 16, 2012 at 7:01 PM, Keshava Munegowda
>> >>>> > <[email protected]> wrote:
>> >>>> >> The TLL (Transceiver Less Link) is an separate IP block, independent
>> >>>> >> of
>> >>>> >> the host controller. Basically this TLL operates like USB PHY which
>> >>>> >> allows
>> >>>> >> the user to connect two USB transceiver interfaces together directly
>> >>>> >> without the use of differential transceivers in omap3 and later
>> >>>> >> chips.
>> >>>> >> The TLL configuration is removed from the UHH driver and implemented
>> >>>> >> as
>> >>>> >> a seperate platform driver. Now, the UHH driver configures the TLL
>> >>>> >> through API's exported by the TLL platform driver.
>> >>>> >>
>> >>>> >> Signed-off-by: Keshava Munegowda <[email protected]>
>> >>>> >>
>> >>>> >> In v4:
>> >>>> >> - rebased on top of linux kernel version 3.5.rc7
>> >>>> >> - reworked as per the comments given by Paul Walmsley
>> >>>> >> <[email protected]>
>> >>>> >>
>> >>>> >> In v3:
>> >>>> >> - rebased on top V3 of Russ dill's patch
>> >>>> >> 'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue'
>> >>>> >> fixes an issue where the ULPI PHYs were not held in reset
>> >>>> >> while initializing the EHCI controller
>> >>>> >> http://permalink.gmane.org/gmane.linux.usb.general/65988
>> >>>> >>
>> >>>> >> - rebased on top of patch
>> >>>> >> OMAP: USB : Fix the EHCI enumeration and core retention issue
>> >>>> >> http://permalink.gmane.org/gmane.linux.usb.general/66239
>> >>>> >>
>> >>>> >> In V2:
>> >>>> >> - covered review comments from linux omap and usb community
>> >>>> >> - rebased on top Russ dill's patch
>> >>>> >> 'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue'
>> >>>> >> fixes an issue where the ULPI PHYs were not held in reset
>> >>>> >> while initializing the EHCI controller
>> >>>> >>
>> >>>> >> Keshava Munegowda (5):
>> >>>> >> ARM: OMAP: Add the USB TLL clocks device name
>> >>>> >> ARM: OMAP: USB: HOST TLL platform driver
>> >>>> >> ARM: OMAP: USB: Invoke the TLL driver from USB HS core driver
>> >>>> >> ARM: OMAP: USB: Remove TLL specific code from USB HS core driver
>> >>>> >> ARM: OMAP: Remove older device name of the USB TLL clocks
>> >>>> >>
>> >>>> >> arch/arm/mach-omap2/clock3xxx_data.c | 8 +-
>> >>>> >> arch/arm/mach-omap2/clock44xx_data.c | 4 +-
>> >>>> >> arch/arm/mach-omap2/usb-host.c | 31 ++-
>> >>>> >> arch/arm/plat-omap/include/plat/usb.h | 7 +
>> >>>> >> drivers/mfd/Kconfig | 2 +-
>> >>>> >> drivers/mfd/Makefile | 2 +-
>> >>>> >> drivers/mfd/omap-usb-host.c | 238 ++---------------
>> >>>> >> drivers/mfd/omap-usb-tll.c | 471
>> >>>> >> +++++++++++++++++++++++++++++++++
>> >>>> >> 8 files changed, 523 insertions(+), 240 deletions(-)
>> >>>> >> create mode 100644 drivers/mfd/omap-usb-tll.c
>> >>>> >>
>> >>>> >> --
>> >>>> >> 1.7.9.5
>> >>>> >
>> >>>> >
>> >>>> > Felipe/ Paul
>> >>>> > please let me know if you have any review comments on this v4
>> >>>> > series.
>> >>>> >
>> >>>> > regards
>> >>>> > keshava
>> >>>>
>> >>>> Hi Felipe
>> >>>> please let me know if you have any review comments on this
>> >>>> series now.
>> >>>
>> >>> looks ok... pretty much just moving code around.
>> >>>
>> >>> --
>> >>> balbi
>> >>
>> >>
>> >> Thanks Felipe
>> >>
>> >> then I request please give your Ack by for this series.
>> >>
>> >> regards
>> >> keshava
>> >
>> > Hi Paul
>> > do you have any review comments on this series?
>> > Felipe is OK with this series. if there are no review comments on this
>> > series
>> > I request your ack by for the same.
>> > Once this series gets in to mainline. i will start the Device tree
>> > conversion for usb2 host.
>> >
>> > regards
>> > keshava
>>
>> Hi Felipe
>> please give you ack by this series , so that I request
>> samuel to merge to mainline.
>
> sure, here you go
>
> Acked-by: Felipe Balbi <[email protected]>
>
> --
> balbi
Thanks Felipe
Samuel
I request please queue this series for the next merge window.
regards
keshava
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
