On 08/20/2012 12:41 PM, Marc Kleine-Budde wrote: > On 08/20/2012 10:45 AM, AnilKumar Ch wrote: >> Add Runtime PM support to C_CAN/D_CAN controller. The runtime PM >> APIs control clocks for C_CAN/D_CAN IP and prevent access to the >> register of C_CAN/D_CAN IP when clock is turned off. >> >> Signed-off-by: AnilKumar Ch <[email protected]> >> --- >> This patch has been tested on AM335X EVM. Due to lack of hardware >> I am not able to test c_can functionality. I appreciate if anyone >> can test c_can functionality with this patch. >> >> This patch is based on "can-next/master" >> >> Changes from v7: >> - Incorporated Marc's commets on v7 >> * changed device pointer to c_can_priv pointer > > looks good. > > [...] > >> --- a/drivers/net/can/c_can/c_can_platform.c >> +++ b/drivers/net/can/c_can/c_can_platform.c >> @@ -32,6 +32,7 @@ >> #include <linux/clk.h> >> #include <linux/of.h> >> #include <linux/of_device.h> >> +#include <linux/pm_runtime.h> >> >> #include <linux/can/dev.h> >> >> @@ -177,8 +178,11 @@ static int __devinit c_can_plat_probe(struct >> platform_device *pdev) >> goto exit_free_device; > ^^^^^^^^^^^^^^^^ >> } >> >> + pm_runtime_enable(&pdev->dev); >> + >> dev->irq = irq; >> priv->base = addr; >> + priv->device = &pdev->dev; >> priv->can.clock.freq = clk_get_rate(clk); >> priv->priv = clk; >> >> @@ -198,6 +202,7 @@ static int __devinit c_can_plat_probe(struct >> platform_device *pdev) >> >> exit_free_device: >> platform_set_drvdata(pdev, NULL); >> + pm_runtime_disable(&pdev->dev); > > I think this will end up in a NULL pointer deferf.
Should be no problem, as you're using pdev->dev not priv->device. Sorry for the noise :) Marc -- Pengutronix e.K. | Marc Kleine-Budde | Industrial Linux Solutions | Phone: +49-231-2826-924 | Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
signature.asc
Description: OpenPGP digital signature
