On Tue, Aug 21, 2012 at 11:47:43AM +0530, Shubhrajyoti D wrote:
> Remove the macro MOD_REG_BIT instead make the bit field modifications
> directly. This deletes a branch operation in cases where the the set
> is predecided.While at it optimise two sequential bit clear in one step.
               ^^
               you need a space here, besides you can add the ack below

> Signed-off-by: Shubhrajyoti D <shubhrajy...@ti.com>

Acked-by: Felipe Balbi <ba...@ti.com>

> ---
>  drivers/spi/spi-omap2-mcspi.c |   28 ++++++++++++++--------------
>  1 files changed, 14 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
> index dd887eb..5642111 100644
> --- a/drivers/spi/spi-omap2-mcspi.c
> +++ b/drivers/spi/spi-omap2-mcspi.c
> @@ -140,13 +140,6 @@ struct omap2_mcspi_cs {
>       u32                     chconf0;
>  };
>  
> -#define MOD_REG_BIT(val, mask, set) do { \
> -     if (set) \
> -             val |= mask; \
> -     else \
> -             val &= ~mask; \
> -} while (0)
> -
>  static inline void mcspi_write_reg(struct spi_master *master,
>               int idx, u32 val)
>  {
> @@ -205,7 +198,11 @@ static void omap2_mcspi_set_dma_req(const struct 
> spi_device *spi,
>       else
>               rw = OMAP2_MCSPI_CHCONF_DMAW;
>  
> -     MOD_REG_BIT(l, rw, enable);
> +     if (enable)
> +             l |= rw;
> +     else
> +             l &= ~rw;
> +
>       mcspi_write_chconf0(spi, l);
>  }
>  
> @@ -224,7 +221,11 @@ static void omap2_mcspi_force_cs(struct spi_device *spi, 
> int cs_active)
>       u32 l;
>  
>       l = mcspi_cached_chconf0(spi);
> -     MOD_REG_BIT(l, OMAP2_MCSPI_CHCONF_FORCE, cs_active);
> +     if (cs_active)
> +             l |= OMAP2_MCSPI_CHCONF_FORCE;
> +     else
> +             l &= ~OMAP2_MCSPI_CHCONF_FORCE;
> +
>       mcspi_write_chconf0(spi, l);
>  }
>  
> @@ -239,9 +240,8 @@ static void omap2_mcspi_set_master_mode(struct spi_master 
> *master)
>        * to single-channel master mode
>        */
>       l = mcspi_read_reg(master, OMAP2_MCSPI_MODULCTRL);
> -     MOD_REG_BIT(l, OMAP2_MCSPI_MODULCTRL_STEST, 0);
> -     MOD_REG_BIT(l, OMAP2_MCSPI_MODULCTRL_MS, 0);
> -     MOD_REG_BIT(l, OMAP2_MCSPI_MODULCTRL_SINGLE, 1);
> +     l &= ~(OMAP2_MCSPI_MODULCTRL_STEST | OMAP2_MCSPI_MODULCTRL_MS);
> +     l |= OMAP2_MCSPI_MODULCTRL_SINGLE;
>       mcspi_write_reg(master, OMAP2_MCSPI_MODULCTRL, l);
>  
>       ctx->modulctrl = l;
> @@ -1276,9 +1276,9 @@ static int omap2_mcspi_resume(struct device *dev)
>                        * We need to toggle CS state for OMAP take this
>                        * change in account.
>                        */
> -                     MOD_REG_BIT(cs->chconf0, OMAP2_MCSPI_CHCONF_FORCE, 1);
> +                     cs->chconf0 |= OMAP2_MCSPI_CHCONF_FORCE;
>                       __raw_writel(cs->chconf0, cs->base + 
> OMAP2_MCSPI_CHCONF0);
> -                     MOD_REG_BIT(cs->chconf0, OMAP2_MCSPI_CHCONF_FORCE, 0);
> +                     cs->chconf0 &= ~OMAP2_MCSPI_CHCONF_FORCE;
>                       __raw_writel(cs->chconf0, cs->base + 
> OMAP2_MCSPI_CHCONF0);
>               }
>       }
> -- 
> 1.7.5.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

-- 
balbi

Attachment: signature.asc
Description: Digital signature

Reply via email to