Adopt pinctrl support to c_can driver based on c_can device pointer, pinctrl driver configure SoC pins to d_can mode according to definitions provided in .dts file.
In device specific device tree file 'pinctrl-names = "default";' and 'pinctrl-0 = <&d_can1_pins>;' needs to add to configure pins from c_can driver. d_can1_pins node contains the pinmux/config details of d_can L/H pins. Signed-off-by: AnilKumar Ch <[email protected]> --- drivers/net/can/c_can/c_can_platform.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c index 90801c4..c351975 100644 --- a/drivers/net/can/c_can/c_can_platform.c +++ b/drivers/net/can/c_can/c_can_platform.c @@ -33,6 +33,7 @@ #include <linux/of.h> #include <linux/of_device.h> #include <linux/pm_runtime.h> +#include <linux/pinctrl/consumer.h> #include <linux/can/dev.h> @@ -98,6 +99,7 @@ static int __devinit c_can_plat_probe(struct platform_device *pdev) struct c_can_priv *priv; const struct of_device_id *match; const struct platform_device_id *id; + struct pinctrl *pinctrl; struct resource *mem; int irq; struct clk *clk; @@ -114,6 +116,11 @@ static int __devinit c_can_plat_probe(struct platform_device *pdev) id = platform_get_device_id(pdev); } + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) + dev_warn(&pdev->dev, + "failed to configure pins from driver\n"); + /* get the appropriate clk */ clk = clk_get(&pdev->dev, NULL); if (IS_ERR(clk)) { -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
